Add support for an environment stored in the first partition of the disk, which is assumed to hold a FAT filesystem.
Support the 'cat' command as it is useful for looking at extlinux.conf files. Signed-off-by: Simon Glass <s...@chromium.org> --- (no changes since v1) configs/qemu-x86_64_defconfig | 6 ++++-- configs/qemu-x86_defconfig | 4 ++++ 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/configs/qemu-x86_64_defconfig b/configs/qemu-x86_64_defconfig index 84b7dc8e99f..ae34cc2a6f8 100644 --- a/configs/qemu-x86_64_defconfig +++ b/configs/qemu-x86_64_defconfig @@ -41,9 +41,7 @@ CONFIG_SPL_NO_BSS_LIMIT=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_CPU=y -CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DM_SPI_FLASH=y -CONFIG_SPL_NET=y CONFIG_SPL_PCI=y CONFIG_SPL_PCH=y CONFIG_SPL_RTC=y @@ -54,6 +52,7 @@ CONFIG_CMD_MEM_SEARCH=y CONFIG_CMD_IDE=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y +CONFIG_CMD_CAT=y # CONFIG_CMD_SETEXPR is not set CONFIG_BOOTP_BOOTFILESIZE=y CONFIG_CMD_EFIDEBUG=y @@ -61,6 +60,9 @@ CONFIG_CMD_TIME=y CONFIG_CMD_BOOTSTAGE=y CONFIG_CMD_EXT4_WRITE=y CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_IN_FAT=y +CONFIG_ENV_FAT_INTERFACE="virtio" +CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="bzImage" diff --git a/configs/qemu-x86_defconfig b/configs/qemu-x86_defconfig index d52afa42955..7afa3827e61 100644 --- a/configs/qemu-x86_defconfig +++ b/configs/qemu-x86_defconfig @@ -34,6 +34,7 @@ CONFIG_CMD_MEM_SEARCH=y CONFIG_CMD_IDE=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y +CONFIG_CMD_CAT=y # CONFIG_CMD_SETEXPR is not set CONFIG_BOOTP_BOOTFILESIZE=y CONFIG_CMD_EFIDEBUG=y @@ -42,6 +43,9 @@ CONFIG_CMD_BOOTSTAGE=y CONFIG_CMD_EXT4_WRITE=y CONFIG_MAC_PARTITION=y CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_IN_FAT=y +CONFIG_ENV_FAT_INTERFACE="virtio" +CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="bzImage" -- 2.43.0
