Vendor Authorized Boot flow configurations are enabled for boards based on Agilex5 SoCFPGA. Also, required changes are made to the SoCFPGA make file for building and linking relevant secure source code files.
Signed-off-by: Naresh Kumar Ravulapalli <nareshkumar.ravulapa...@altera.com> --- arch/arm/mach-socfpga/Makefile | 2 + configs/socfpga_agilex5_vab_defconfig | 102 ++++++++++++++++++++++++++ 2 files changed, 104 insertions(+) create mode 100644 configs/socfpga_agilex5_vab_defconfig diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile index 22d48dfae1..c43fdee4a4 100644 --- a/arch/arm/mach-socfpga/Makefile +++ b/arch/arm/mach-socfpga/Makefile @@ -68,6 +68,8 @@ obj-y += altera-sysmgr.o obj-y += ccu_ncore3.o obj-y += system_manager_soc64.o obj-y += timer_s10.o +obj-$(CONFIG_SOCFPGA_SECURE_VAB_AUTH) += secure_vab.o +obj-$(CONFIG_SOCFPGA_SECURE_VAB_AUTH) += vab.o endif ifdef CONFIG_TARGET_SOCFPGA_N5X diff --git a/configs/socfpga_agilex5_vab_defconfig b/configs/socfpga_agilex5_vab_defconfig new file mode 100644 index 0000000000..a66add2b84 --- /dev/null +++ b/configs/socfpga_agilex5_vab_defconfig @@ -0,0 +1,102 @@ +CONFIG_ARM=y +CONFIG_ARCH_SOCFPGA=y +CONFIG_TEXT_BASE=0x80200000 +CONFIG_NR_DRAM_BANKS=3 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80300000 +CONFIG_SF_DEFAULT_MODE=0x2003 +CONFIG_ENV_SIZE=0x2000 +CONFIG_DM_GPIO=y +CONFIG_DEFAULT_DEVICE_TREE="socfpga_agilex5_socdk" +CONFIG_DM_RESET=y +CONFIG_SPL_STACK=0x7d000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0xbff00000 +CONFIG_SPL_BSS_MAX_SIZE=0x100000 +CONFIG_SYS_LOAD_ADDR=0x82000000 +CONFIG_TARGET_SOCFPGA_AGILEX5_SOCDK=y +CONFIG_IDENT_STRING="socfpga_agilex5" +CONFIG_SPL_FS_FAT=y +# CONFIG_EFI_LOADER is not set +CONFIG_FIT=y +CONFIG_SPL_FIT_SIGNATURE=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_SPL_LOAD_FIT_ADDRESS=0x82000000 +CONFIG_LEGACY_IMAGE_FORMAT=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_QSPI_BOOT=y +CONFIG_BOOTDELAY=5 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 initrd=0x90000000 root=/dev/ram0 rw init=/sbin/init ramdisk_size=10000000 earlycon panic=-1 nosmp kvm-arm.mode=nvhe" +CONFIG_SPL_MAX_SIZE=0x40000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0xbfa00000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x500000 +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_CACHE=y +CONFIG_SPL_SPI_FLASH_MTD=y +CONFIG_SPL_MTD=y +CONFIG_SPL_SPI_LOAD=y +CONFIG_SYS_SPI_U_BOOT_OFFS=0x04000000 +CONFIG_SPL_ATF=y +CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y +CONFIG_SYS_PROMPT="SOCFPGA_AGILEX5 # " +CONFIG_SYS_MAXARGS=32 +CONFIG_CMD_NVEDIT_SELECT=y +CONFIG_CMD_MEMTEST=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MTD=y +CONFIG_CMD_SPI=y +CONFIG_CMD_USB=y +CONFIG_CMD_WDT=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_TIMER=y +CONFIG_CMD_UBI=y +# CONFIG_ISO_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +CONFIG_OF_LIST="" +CONFIG_ENV_IS_IN_UBI=y +CONFIG_ENV_UBI_PART="root" +CONFIG_ENV_UBI_VOLUME="env" +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_USE_BOOTFILE=y +CONFIG_BOOTFILE="kernel.itb" +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SPL_ALTERA_SDRAM=y +CONFIG_DWAPB_GPIO=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_DW=y +CONFIG_MISC=y +CONFIG_DM_MTD=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_SPI_FLASH_MTD=y +CONFIG_RGMII=y +CONFIG_SYS_NS16550_MEM32=y +CONFIG_SPI=y +CONFIG_CADENCE_QSPI=y +CONFIG_DESIGNWARE_SPI=y +CONFIG_TIMER=y +CONFIG_DESIGNWARE_APB_TIMER=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_DWC2=y +CONFIG_DESIGNWARE_WATCHDOG=y +CONFIG_WDT=y +# CONFIG_SPL_USE_TINY_PRINTF is not set +CONFIG_PANIC_HANG=y +CONFIG_SPL_CRC32=y +CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_BLOBLIST=y +CONFIG_BLOBLIST_SIZE=0x1000 +CONFIG_BLOBLIST_ADDR=0x7e000 +CONFIG_HANDOFF=y +CONFIG_SPL_RECOVER_DATA_SECTION=y +CONFIG_DWC_ETH_XGMAC=y +CONFIG_FIT_IMAGE_POST_PROCESS=y +CONFIG_SOCFPGA_SECURE_VAB_AUTH=y -- 2.35.3
