This file was using IS_ENABLED() to test for CONFIG flags but omitted
the CONFIG_ prefix and so did not work as expected.
Signed-off-by: Tom Rini <tr...@konsulko.com>
---
Cc: Simon Glass <s...@chromium.org>
Cc: Bin Meng <bmeng...@gmail.com>
---
arch/x86/include/asm/intel_pinctrl_defs.h | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/x86/include/asm/intel_pinctrl_defs.h
b/arch/x86/include/asm/intel_pinctrl_defs.h
index 5d83d24bae2d..f45c06076f57 100644
--- a/arch/x86/include/asm/intel_pinctrl_defs.h
+++ b/arch/x86/include/asm/intel_pinctrl_defs.h
@@ -133,7 +133,7 @@
#define PAD_CFG2_DEBOUNCE_MASK 0x1f
/* voltage tolerance 0=3.3V default 1=1.8V tolerant */
-#if IS_ENABLED(INTEL_PINCTRL_IOSTANDBY)
+#if IS_ENABLED(CONFIG_INTEL_PINCTRL_IOSTANDBY)
#define PAD_CFG1_TOL_MASK (0x1 << 25)
#define PAD_CFG1_TOL_1V8 (0x1 << 25)
#endif
@@ -150,7 +150,7 @@
PAD_CFG0_TRIG_##trig | \
PAD_CFG0_RX_POL_##inv)
-#if IS_ENABLED(INTEL_PINCTRL_DUAL_ROUTE_SUPPORT)
+#if IS_ENABLED(CONFIG_INTEL_PINCTRL_DUAL_ROUTE_SUPPORT)
#define PAD_IRQ_CFG_DUAL_ROUTE(route1, route2, trig, inv) \
(PAD_CFG0_ROUTE_##route1 | \
PAD_CFG0_ROUTE_##route2 | \
@@ -354,7 +354,7 @@
PAD_IRQ_CFG(NMI, trig, inv), PAD_PULL(pull) | \
PAD_IOSSTATE(TXD_RXE))
-#if IS_ENABLED(INTEL_PINCTRL_DUAL_ROUTE_SUPPORT)
+#if IS_ENABLED(CONFIG_INTEL_PINCTRL_DUAL_ROUTE_SUPPORT)
/* GPI, GPIO Driver, SCI interrupt */
#define PAD_CFG_GPI_GPIO_DRIVER_SCI(pad, pull, rst, trig, inv) \
_PAD_CFG_STRUCT(pad, \
--
2.43.0
