Hi Tom,
Sorry this is a bit later than expected.
The clk_stub, regulator, and pinctrl fixes enable the sdcard on the RB5 dev
board (and sm8250 devices broadly). clk_stub is only enabled in qcom_defconfig
and the others are qcom specific so these shouldn't affect other platforms.
Lastly, a small ufetch fix from Sam which gets color rendering correctly on
U-Boots framebuffer video device.
Kind regards,
Caleb
The following changes since commit dc0ee458f1afae4cb5c8a7b2c875bb24ffdf71ca:
Prepare v2025.04-rc3 (2025-02-24 16:53:59 -0600)
are available in the Git repository at:
g...@source.denx.de:u-boot/custodians/u-boot-snapdragon.git
tags/qcom-fixes-2025.04-rc4
for you to fetch changes up to 6267ce556595e0586aee3a7d63042d105dc3fa4e:
cmd: ufetch: use 3-bit colour ANSI codes (2025-02-26 13:48:27 +0000)
----------------------------------------------------------------
Caleb Connolly (4):
clk: add stub clock driver
qcom_defconfig: enable stub clock
power: regulator: add additional supported LDOs for pm8150l
pinctrl: qcom: sm8250: fix pin count
Julius Lehmann (1):
clk: stub: add sm8150 compatible id
Sam Day (1):
cmd: ufetch: use 3-bit colour ANSI codes
cmd/ufetch.c | 4 +-
configs/qcom_defconfig | 1 +
drivers/clk/Kconfig | 7 +++
drivers/clk/Makefile | 1 +
drivers/clk/clk-stub.c | 67 +++++++++++++++++++++++++++
drivers/pinctrl/qcom/pinctrl-sm8250.c | 2 +-
drivers/power/regulator/qcom-rpmh-regulator.c | 7 +++
7 files changed, 86 insertions(+), 3 deletions(-)
create mode 100644 drivers/clk/clk-stub.c
