[PATCH v3 17/23] net: designware: Allocate bb_miiphy using bb_miiphy_alloc() and fill in callbacks

[Marek Vasut]

Allocate bb_miiphy using bb_miiphy_alloc() and fill in callbacks
currently listed in bb_miiphy_buses[] array. This is a temporary
duplication of assignment to avoid breakage, which will be removed
in follow up patches. At this point, the bb_miiphy callbacks can
reach these accessors by doing container_of() on struct mii_dev.

Signed-off-by: Marek Vasut <marek.vasut+rene...@mailbox.org>
---
Cc: Christian Marangi <ansuels...@gmail.com>
Cc: Ilias Apalodimas <ilias.apalodi...@linaro.org>
Cc: Jerome Forissier <jerome.foriss...@linaro.org>
Cc: Jim Liu <jjl...@nuvoton.com>
Cc: Joe Hershberger <joe.hershber...@ni.com>
Cc: Mario Six <mario....@gdsys.cc>
Cc: Michal Simek <michal.si...@amd.com>
Cc: Nobuhiro Iwamatsu <iwama...@nigauri.org>
Cc: Paul Barker <paul.barker...@bp.renesas.com>
Cc: Ramon Fried <rfried....@gmail.com>
Cc: Simon Glass <s...@chromium.org>
Cc: Sughosh Ganu <sughosh.g...@linaro.org>
Cc: Tom Rini <tr...@konsulko.com>
Cc: u-boot@lists.denx.de
---
V2: New patch
V3: No change
---
 drivers/net/designware.c | 23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)

diff --git a/drivers/net/designware.c b/drivers/net/designware.c
index c88b8df28ed..74cf8271e67 100644
--- a/drivers/net/designware.c
+++ b/drivers/net/designware.c
@@ -307,14 +307,17 @@ int bb_miiphy_buses_num = ARRAY_SIZE(bb_miiphy_buses);
 static int dw_bb_mdio_init(const char *name, struct udevice *dev)
 {
        struct dw_eth_dev *dwpriv = dev_get_priv(dev);
-       struct mii_dev *bus = mdio_alloc();
+       struct bb_miiphy_bus *bb_miiphy = bb_miiphy_alloc();
+       struct mii_dev *bus;
        int ret;
 
-       if (!bus) {
+       if (!bb_miiphy) {
                printf("Failed to allocate MDIO bus\n");
                return -ENOMEM;
        }
 
+       bus = &bb_miiphy->mii;
+
        debug("\n%s: use bitbang mii..\n", dev->name);
        ret = gpio_request_by_name(dev, "snps,mdc-gpio", 0,
                                   &dwpriv->mdc_gpio,
@@ -345,6 +348,15 @@ static int dw_bb_mdio_init(const char *name, struct 
udevice *dev)
 #endif
        bus->priv = dwpriv;
 
+       /* Copy the bus accessors, name and private data */
+       bb_miiphy->mdio_active = dw_eth_bb_mdio_active;
+       bb_miiphy->mdio_tristate = dw_eth_bb_mdio_tristate;
+       bb_miiphy->set_mdio = dw_eth_bb_set_mdio;
+       bb_miiphy->get_mdio = dw_eth_bb_get_mdio;
+       bb_miiphy->set_mdc = dw_eth_bb_set_mdc;
+       bb_miiphy->delay = dw_eth_bb_delay;
+       strlcpy(bb_miiphy->name, bus->name, MDIO_NAME_LEN);
+
        return mdio_register(bus);
 }
 #endif
@@ -968,7 +980,12 @@ int designware_eth_probe(struct udevice *dev)
        /* continue here for cleanup if no PHY found */
        err = ret;
        mdio_unregister(priv->bus);
-       mdio_free(priv->bus);
+#if IS_ENABLED(CONFIG_BITBANGMII) && IS_ENABLED(CONFIG_DM_GPIO)
+       if (bbmiiphy)
+               bb_miiphy_free(container_of(priv->bus, struct bb_miiphy_bus, 
mii));
+       else
+#endif
+               mdio_free(priv->bus);
 mdio_err:
 
 #ifdef CONFIG_CLK
-- 
2.47.2