JH7110 boards are currently the only use case for multi DTB FIT images
on RISC-V.
Booting JH7110 systems with a VisionFive 2 device-tree used to kind of
work without causing harm to the hardware. But there is no guarantee
that this will hold true in future. So we should not rely on it.
Before the current patch series booting failed on unsupported boards due
to the lack of a device-tree in the binman generated default configuration
when reaching main U-Boot.
By not setting a default configuration booting will now fail on
unsupported boards already in SPL. This allows SPL to
continue with the next boot source for a possible recovery.
Signed-off-by: Heinrich Schuchardt <heinrich.schucha...@canonical.com>
---
v3:
new patch
---
arch/riscv/dts/binman.dtsi | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/riscv/dts/binman.dtsi b/arch/riscv/dts/binman.dtsi
index 782ef037f7a..ceb916b74a7 100644
--- a/arch/riscv/dts/binman.dtsi
+++ b/arch/riscv/dts/binman.dtsi
@@ -93,7 +93,10 @@
};
configurations {
+
+#ifndef CONFIG_MULTI_DTB_FIT
default = "conf-1";
+#endif
#if !defined(CONFIG_OF_BOARD) || defined(CONFIG_MULTI_DTB_FIT)
@conf-SEQ {
--
2.47.1
