Le 05/02/2025 à 11:15, Oleksii Moisieiev a écrit :
This patch series provides generic support for Raspberry PI 5 in
U-Boot with additional hardware drivers.
The following features were implemented:
1) add generic board config for Raspberry PI5 including device-tree
files;
2) add support for RP1 chip with additional hardware;
3) add support for rp1-clock driver with dt-bindings update;
4) PCIE BRCMSTB driver support for Raspberry PI 5;
5) add clock/reset/gpio drivers;
6) add ethernet support in u-boot.
[...]
Tested-by: Etienne Dublé <etienne.du...@imag.fr>
I applied the patch on commit 6e316e3f397b5e01e98c5dd56cdbaab961daeedf (April
15, 2024) and used it for network booting a Raspberry Pi 5 in a WALT platform
[1].
Our boot procedure is quite convoluted and in this specific case it
involves two network transfers (a small u-boot script first, which is
then executed and triggers the download of a FIT image) but I have not
noticed any problems. I hope the remaining questions will be quickly
sorted out by linux kernel maintainers. Great work Oleksii!
Thanks
Etienne
[1]: https://walt-project.liglab.fr/
--
Etienne Dublé
CNRS / LIG - Bâtiment IMAG
150 place du Torrent
38400 St Martin d'Hères
Bureau 426 - Tel 0457421431
