Enable support for USB DFU boot via USB0 instance of USB on J784S4 SoC which is a Cadence USB Controller. Additionally, enable support for USB DFU flash and USB Mass Storage (UMS) command. While at it, sync with savedefconfig.
Signed-off-by: Siddharth Vadapalli <s-vadapa...@ti.com> --- configs/j784s4_evm_a72_defconfig | 30 ++++++++++++++++++++++-------- 1 file changed, 22 insertions(+), 8 deletions(-) diff --git a/configs/j784s4_evm_a72_defconfig b/configs/j784s4_evm_a72_defconfig index 1ac2430d7d..1ba2bfed2c 100644 --- a/configs/j784s4_evm_a72_defconfig +++ b/configs/j784s4_evm_a72_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_K3=y CONFIG_SYS_MALLOC_LEN=0x2000000 CONFIG_SYS_MALLOC_F_LEN=0x8000 +CONFIG_TI_COMMON_CMD_OPTIONS=y CONFIG_SPL_GPIO=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y @@ -14,13 +15,13 @@ CONFIG_ENV_SIZE=0x20000 CONFIG_DM_GPIO=y CONFIG_SPL_DM_SPI=y CONFIG_DEFAULT_DEVICE_TREE="ti/k3-j784s4-evm" -CONFIG_SPL_TEXT_BASE=0x80080000 CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_DM_RESET=y CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL_STACK_R_ADDR=0x82000000 +CONFIG_SPL_TEXT_BASE=0x80080000 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x80a00000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 @@ -29,6 +30,7 @@ CONFIG_SPL_FS_FAT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y +CONFIG_EFI_SET_TIME=y CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000 CONFIG_BOOTSTD_FULL=y @@ -38,10 +40,8 @@ CONFIG_SPL_MAX_SIZE=0xc0000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_SYS_MMCSD_RAW_MODE=y -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400 CONFIG_SPL_DMA=y -CONFIG_SPL_DM_DEVICE_REMOVE=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" CONFIG_SPL_I2C=y @@ -49,7 +49,6 @@ CONFIG_SPL_DM_MAILBOX=y CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_DM_RESET=y CONFIG_SPL_POWER_DOMAIN=y -CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y # CONFIG_SPL_SPI_FLASH_TINY is not set CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y @@ -58,10 +57,9 @@ CONFIG_SYS_SPI_U_BOOT_OFFS=0x280000 CONFIG_SPL_THERMAL=y CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_CMD_BOOTEFI_SELFTEST=y -CONFIG_CMD_ASKENV=y CONFIG_CMD_NVEDIT_EFI=y CONFIG_CMD_MTD=y -CONFIG_CMD_USB=y +CONFIG_CMD_USB_MASS_STORAGE=y CONFIG_CMD_EFIDEBUG=y CONFIG_OF_CONTROL=y CONFIG_SPL_OF_CONTROL=y @@ -72,6 +70,7 @@ CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM=y +CONFIG_SPL_DM_DEVICE_REMOVE=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_REGMAP=y CONFIG_SPL_REGMAP=y @@ -81,6 +80,8 @@ CONFIG_CLK=y CONFIG_SPL_CLK=y CONFIG_CLK_CCF=y CONFIG_CLK_TI_SCI=y +CONFIG_DFU_MMC=y +CONFIG_DFU_RAM=y CONFIG_DFU_SF=y CONFIG_SYS_DFU_DATA_BUF_SIZE=0x40000 CONFIG_SYS_DFU_MAX_FILE_SIZE=0x800000 @@ -154,7 +155,20 @@ CONFIG_SYSRESET=y CONFIG_SPL_SYSRESET=y CONFIG_SYSRESET_TI_SCI=y CONFIG_DM_THERMAL=y -CONFIG_EFI_SET_TIME=y -CONFIG_TI_COMMON_CMD_OPTIONS=y +CONFIG_USB=y +CONFIG_DM_USB_GADGET=y +CONFIG_SPL_DM_USB_GADGET=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_CDNS3=y +CONFIG_USB_CDNS3_GADGET=y +CONFIG_USB_CDNS3_HOST=y +CONFIG_SPL_USB_CDNS3_GADGET=y +CONFIG_USB_GADGET=y +CONFIG_SPL_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" +CONFIG_USB_GADGET_VENDOR_NUM=0x0451 +CONFIG_USB_GADGET_PRODUCT_NUM=0x6168 +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_SPL_DFU=y #include <configs/k3_efi_capsule.config> -- 2.43.0
