[PATCH 1/2] arm: mach-k3: j722s: Initialize MCU & MAIN Domain ESMs

[Keerthy]

Initialize MCU & MAIN Domain ESMs as a prerequisite to enable
watchdog reset functionality. The ESM aka error signalling module
is primarily responsible for sensing the watchdog reset event.

Signed-off-by: Keerthy <j-keer...@ti.com>
---
 arch/arm/mach-k3/j722s/j722s_init.c | 32 +++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/arch/arm/mach-k3/j722s/j722s_init.c 
b/arch/arm/mach-k3/j722s/j722s_init.c
index f8c5c2a5edc..af211377e7c 100644
--- a/arch/arm/mach-k3/j722s/j722s_init.c
+++ b/arch/arm/mach-k3/j722s/j722s_init.c
@@ -27,6 +27,9 @@ struct fwl_data cbass_main_fwls[] = {
 u32 bootindex __section(".data");
 static struct rom_extended_boot_data bootdata __section(".data");
 
+#define CTRLMMR_MCU_RST_CTRL   (MCU_CTRL_MMR0_BASE + 0x18170)
+#define RST_CTRL_ESM_ERROR_RST_EN_Z_MASK  (~BIT(17))
+
 static void store_boot_info_from_rom(void)
 {
        bootindex = *(u32 *)(CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX);
@@ -161,11 +164,40 @@ static void k3_mem_init(void)
        }
 }
 
+static __maybe_unused void enable_mcu_esm_reset(void)
+{
+       /* Set CTRLMMR_MCU_RST_CTRL:MCU_ESM_ERROR_RST_EN_Z  to '0' (low active) 
*/
+       u32 stat = readl(CTRLMMR_MCU_RST_CTRL);
+
+       stat &= RST_CTRL_ESM_ERROR_RST_EN_Z_MASK;
+       writel(stat, CTRLMMR_MCU_RST_CTRL);
+}
+
 void board_init_f(ulong dummy)
 {
+       int ret;
+       struct udevice *dev;
+
        k3_spl_init();
        k3_mem_init();
        setup_qos();
+
+       if (IS_ENABLED(CONFIG_ESM_K3)) {
+               /* Probe/configure ESM0 */
+               ret = uclass_get_device_by_name(UCLASS_MISC, "esm@420000", 
&dev);
+               if (ret) {
+                       printf("esm main init failed: %d\n", ret);
+                       return;
+               }
+
+               /* Probe/configure MCUESM */
+               ret = uclass_get_device_by_name(UCLASS_MISC, "esm@4100000", 
&dev);
+               if (ret) {
+                       printf("esm mcu init failed: %d\n", ret);
+                       return;
+               }
+               enable_mcu_esm_reset();
+       }
 }
 
 static u32 __get_backup_bootmedia(u32 devstat)
-- 
2.17.1