Hi Tom,
On Thu, Feb 13, 2025, 11:03 Tom Rini <tr...@konsulko.com> wrote:
>
> On Thu, Feb 13, 2025 at 05:50:13AM -0700, Simon Glass wrote:
> > Hi Tom,
> >
> > On Wed, 12 Feb 2025 at 15:58, Tom Rini <tr...@konsulko.com> wrote:
> > >
> > > On Wed, Feb 12, 2025 at 01:05:11PM -0700, Simon Glass wrote:
> > > > Hi Tom,
> > > >
> > > > On Wed, 12 Feb 2025 at 11:35, Tom Rini <tr...@konsulko.com> wrote:
> > > > >
> > > > > On Wed, Feb 12, 2025 at 10:41:45AM -0700, Simon Glass wrote:
> > > > > > Hi Tom,
> > > > > >
> > > > > > On Wed, 12 Feb 2025 at 09:40, Tom Rini <tr...@konsulko.com> wrote:
> > > > > > >
> > > > > > > On Tue, Feb 11, 2025 at 03:54:21PM -0700, Simon Glass wrote:
> > > > > > > > Hi Tom,
> > > > > > > >
> > > > > > > > On Tue, 11 Feb 2025 at 14:22, Tom Rini <tr...@konsulko.com>
> > > > > > > > wrote:
> > > > > > > > >
> > > > > > > > > On Tue, Feb 11, 2025 at 08:03:20AM -0700, Simon Glass wrote:
> > > > > > > > > > Hi,
> > > > > > > > > >
> > > > > > > > > > I just wanted to send a note to (re-)introduce my ideas[1]
> > > > > > > > > > for the
> > > > > > > > > > next iteration of xPL.
> > > > > > > > > >
> > > > > > > > > > A recent series introduced 'xPL' as the name for the various
> > > > > > > > > > pre-U-Boot phases, so now CONFIG_XPL_BUILD means that this
> > > > > > > > > > is any xPL
> > > > > > > > > > phase and CONFIG_SPL means this really is the SPL phase,
> > > > > > > > > > not TPL. We
> > > > > > > > > > still use filenames and function naming which uses 'spl',
> > > > > > > > > > but could
> > > > > > > > > > potentially adjust that.
> > > > > > > > > >
> > > > > > > > > > The major remaining problem IMO is that it is quite tricky
> > > > > > > > > > and
> > > > > > > > > > expensive (in terms of time) to add a new phase. We also
> > > > > > > > > > have some
> > > > > > > > > > medium-sized problems:
> > > > > > > > > >
> > > > > > > > > > a. The $(PHASE_), $(SPL_) rules in the Makefile are
> > > > > > > > > > visually ugly and
> > > > > > > > > > can be confusing, particularly when combined with ifdef and
> > > > > > > > > > ifneq
> > > > > > > > > >
> > > > > > > > > > b. We have both CONFIG_IS_ENABLED() and IS_ENABLED() and
> > > > > > > > > > they mean
> > > > > > > > > > different things. For any given option, some code uses one
> > > > > > > > > > and some
> > > > > > > > > > the other, depending on what problems people have met along
> > > > > > > > > > the way.
> > > > > > > > > >
> > > > > > > > > > c. An option like CONFIG_FOO is ambiguous, in that it could
> > > > > > > > > > mean that
> > > > > > > > > > the option is enabled in one or more xPL phases, or just in
> > > > > > > > > > U-Boot
> > > > > > > > > > proper. The only way to know is to look for $(PHASE_) etc.
> > > > > > > > > > in the
> > > > > > > > > > Makefiles and CONFIG_IS_ENABLED() in the code. This is very
> > > > > > > > > > confusing
> > > > > > > > > > and has not scaled well.
> > > > > > > > > >
> > > > > > > > > > d. We need to retain an important feature: options from
> > > > > > > > > > different
> > > > > > > > > > phases can depend on each other. As an example, we might
> > > > > > > > > > want to
> > > > > > > > > > enable MMC in SPL by default, if MMC is enabled in U-Boot
> > > > > > > > > > proper. We
> > > > > > > > > > may also want to share values between phases, such as
> > > > > > > > > > TEXT_BASE. We
> > > > > > > > > > can do this easily today, just by adding Kconfig rules.
> > > > > > > > >
> > > > > > > > > I agree with a through c and for d there are likely some
> > > > > > > > > cases even if
> > > > > > > > > I'm not sure TEXT_BASE is a good example. But I'm not sure
> > > > > > > > > it's as
> > > > > > > > > important as the other ones.
> > > > > > > >
> > > > > > > > OK. No, TEXT_BASE is not a great example in my book either. But
> > > > > > > > it is
> > > > > > > > true that SPL needs to know U-Boot's text base.
> > > > > > > >
> > > > > > > > Here's another:
> > > > > > > >
> > > > > > > > config SPL_SYS_MALLOC_F_LEN
> > > > > > > > default SYS_MALLOC_F_LEN
> > > > > > > >
> > > > > > > > config TPL_SYS_MALLOC_F
> > > > > > > > default y if SPL_SYS_MALLOC_F
> > > > > > > >
> > > > > > > > config TPL_SYS_MALLOC_F_LEN
> > > > > > > > depends on TPL_SYS_MALLOC_F
> > > > > > > > default SPL_SYS_MALLOC_F_LEN
> > > > > > >
> > > > > > > Alternatively:
> > > > > > > config SYS_MALLOC_LEN
> > > > > > > ... current default X if Y
> > > > > > > default 0x2800 if RCAR_GEN3 && !PPL
> > > > > > > default 0x2000 if IMX8MQ && !PPL
> > > > > >
> > > > > > PPL means (in my book) that we have a PPL, i.e. it is always true.
> > > > > > It
> > > > >
> > > > > And in my proposal you're choosing between PPL, SPL, TPL, VPL.
> > > > >
> > > > > > is the same today, with SPL. We have CONFIG_SPL_BUILD which
> > > > > > indicates
> > > > > > which build it is. If you are suggesting that SPL means that this is
> > > > > > the SPL build, then which thing tells us whether or not we have an
> > > > > > SPL
> > > > > > build? I'm just a bit confused by this.
> > > > >
> > > > > And we wouldn't have CONFIG_SPL_BUILD because we would either be
> > > > > configuring for SPL=y or SPL=n, there's no confusion anymore.
> > > > >
> > > > > > But how can I make the TPL value of SYS_MALLOC_F_LEN the same as the
> > > > > > SPL one, with your scheme?
> > > > >
> > > > > If your question is "how do I set an arbitrary but consistent value in
> > > > > SPL and SPL" that's not enforced. But they also shouldn't be arbitrary
> > > > > and we should have sane defaults set in Kconfig, regardless of either
> > > > > proposal. While I'm trying to not get lost in the details today we
> > > > > have
> > > > > 80 matches on "git grep SPL_.*_LEN= configs/" and 2 for TPL and I
> > > > > would
> > > > > encourage someone to verify those are needed. My initial recollection
> > > > > is
> > > > > that most of these are from when we bumped SYS_MALLOC_F_LEN or so up
> > > > > to
> > > > > the commonly used default and had the few platforms that didn't use
> > > > > the
> > > > > new default previously switch to the old one.
> > > > >
> > > > > In other words, I don't think there's a problem here that isn't solved
> > > > > today, outside of either proposal.
> > > > >
> > > > > > So I'm still not understanding how you handle Kconfig dependencies
> > > > > > between phases with your scheme. Are you saying you don't and they
> > > > > > are
> > > > > > not important?
> > > > >
> > > > > Basically. The majority of the cases of:
> > > > > config SPL_FOO
> > > > > default y if FOO
> > > > >
> > > > > config TPL_FOO
> > > > > default y if SPL_FOO
> > > > >
> > > > > Just go away because FOO is already default y or select/imply'd by
> > > > > TARGET_BAR or ARCH_BAZ.
> > > > >
> > > > > > Also, is there a single Kconfig tree for U-Boot, or are you saying
> > > > > > you
> > > > > > want a different set of Kconfig files for each phase?
> > > > >
> > > > > Just the Kconfig files we have today. Likely with less overall lines
> > > > > since for example we could drop:
> > > > > config SPL_FS_EXT4
> > > > > bool "Support EXT filesystems"
> > > > > select SPL_CRC16 if EXT4_WRITE
> > > > >
> > > > > Since we already have fs/ext4/Kconfig.
> > > > >
> > > > > > > > > > Proposal
> > > > > > > > > >
> > > > > > > > > > 1. Adjust kconf to generate separate autoconf.h files for
> > > > > > > > > > each phase.
> > > > > > > > > > These contain the values for each Kconfig option for that
> > > > > > > > > > phase. For
> > > > > > > > > > example CONFIG_TEXT_BASE in autoconf_spl.h is SPL's text
> > > > > > > > > > base.
> > > > > > > > > >
> > > > > > > > > > 2. Add a file to resolve the ambiguity in (c) above,
> > > > > > > > > > listing the
> > > > > > > > > > Kconfig options which should not be enabled/valid in any
> > > > > > > > > > xPL build.
> > > > > > > > > > There are around 200 of these.
> > > > > > > > > >
> > > > > > > > > > 3. Introduce CONFIG_PPL as a new prefix, meaning U-Boot
> > > > > > > > > > proper (only),
> > > > > > > > > > useful in rare cases. This indicates that the option
> > > > > > > > > > applies only to
> > > > > > > > > > U-Boot proper and is not defined in any xPL build. It is
> > > > > > > > > > analogous to
> > > > > > > > > > CONFIG_TPL_xxx meaning 'enabled in TPL'. Only a dozen of
> > > > > > > > > > these are
> > > > > > > > > > needed at present, basically to allow access to the value
> > > > > > > > > > for another
> > > > > > > > > > phase, e.g. SPL wanting to find CONFIG_PPL_TEXT_BASE so
> > > > > > > > > > that it knows
> > > > > > > > > > the address to which U-Boot should be loaded.
> > > > > > > > > >
> > > > > > > > > > 4. There is no change to the existing defconfig files, or
> > > > > > > > > > 'make
> > > > > > > > > > menuconfig', which works just as today, including
> > > > > > > > > > dependencies between
> > > > > > > > > > options across all phases.
> > > > > > > > > >
> > > > > > > > > > 5. (next) Expand the Kconfig language[2] to support
> > > > > > > > > > declaring phases
> > > > > > > > > > (SPL, TPL, etc.) and remove the need for duplicating
> > > > > > > > > > options (DM_MMC,
> > > > > > > > > > SPL_DM_MMC, TPL_DM_MMC, VPL_DM_MMC), so allowing an option
> > > > > > > > > > to be
> > > > > > > > > > declared once for any/all phases. We can then drop the file
> > > > > > > > > > in 2
> > > > > > > > > > above.
> > > > > > > > > >
> > > > > > > > > > With this, maintaining Kconfig options, Makefiles and
> > > > > > > > > > adding a new
> > > > > > > > > > phase should be considerably easier.
> > > > > > > > >
> > > > > > > > > I think this will not make our life easier, it will make
> > > > > > > > > things harder.
> > > > > > > > >
> > > > > > > > > I think what we've reached now shows that Yamada-san was
> > > > > > > > > correct at the
> > > > > > > > > time in saying that we were going down the wrong path with
> > > > > > > > > how we
> > > > > > > > > handled SPL/TPL.
> > > > > > > >
> > > > > > > > You've mentioned this quite a few times over the years. Is
> > > > > > > > there a
> > > > > > > > reference to what he suggested we should do? Or perhaps it is
> > > > > > > > what you
> > > > > > > > have below.
> > > > > > >
> > > > > > > I don't recall what he proposed instead, just that when it became
> > > > > > > clear
> > > > > > > that I wanted to move from the "S:CONFIG_FOO.." syntax for how
> > > > > > > SPL was
> > > > > > > handled to how we're doing it today, he thought that was the wrong
> > > > > > > direction.
> > > > > >
> > > > > > Yes, IMO he was right about that.
> > > > > >
> > > > > > >
> > > > > > > > > My request instead is:
> > > > > > > > > - Largely drop SPL/TPL/VPL (so no DM_MMC and SPL_DM_MMC and
> > > > > > > > > so on, just
> > > > > > > > > DM_MMC) as a prefix.
> > > > > > > > > - Likely need to introduce a PPL symbol as you suggest.
> > > > > > > > > - Make PPL/SPL/TPL/VPL be a choice statement when building a
> > > > > > > > > defconfig.
> > > > > > > >
> > > > > > > > Good idea.
> > > > > > > >
> > > > > > > > > - Split something like rockpro64-rk3399_defconfig in to
> > > > > > > > > rockpro64-rk3399_ppl_defconfig
> > > > > > > > > rockpro64-rk3399_spl_defconfig
> > > > > > > > > rockpro64-rk3399_tpl_defconfig
> > > > > > > > > and add Makefile logic such that for X_defconfig as a build
> > > > > > > > > target but
> > > > > > > > > not configs/X_defconfig not existing, we see if any of
> > > > > > > > > configs/X_{ppl,spl,tpl,vpl}_defconfig exist and we run a
> > > > > > > > > builds in
> > > > > > > > > subdirectories of our object directory, and then using
> > > > > > > > > binman combine
> > > > > > > > > as needed.
> > > > > > > >
> > > > > > > > This means splitting the existing file into a separate one for
> > > > > > > > each
> > > > > > > > phase. I believe that will be hard to manage.
> > > > > > >
> > > > > > > Do you mean initially, or long term? Initially, it should be a
> > > > > > > bit of
> > > > > > > shell scripting. The consolidation (ie most/all rk3399 having an
> > > > > > > identical _spl_defconfig) can't be automated. Long term I'm not
> > > > > > > sure it
> > > > > > > would be any different. Most of the maintenance is on resync'ing
> > > > > > > which
> > > > > > > is automated.
> > > > > >
> > > > > > Long term. How does 'make menuconfig' work in this case? Won't you
> > > > > > have to run it three times for SPL, TPL and PPL?
> > > > >
> > > > > Yes, you would run configure for what you're building. This is a good
> > > > > thing as it will no longer be so confusing to hunt down where SPL or
> > > > > TPL
> > > > > or VPL options for a specific thing reside.
> > > > >
> > > > > > > > > - Maybe instead the Makefile logic above we would parse
> > > > > > > > > X_defconfig
> > > > > > > > > and see if it's a different format of say PHASE:file to
> > > > > > > > > make it
> > > > > > > > > easier to say share a single TPL config with all rk3399,
> > > > > > > > > have a few
> > > > > > > > > common SPL configs and then just a board specific PPL.
> > > > > > > > >
> > > > > > > > > This solves (a) by removing them entirely. This solves (b) by
> > > > > > > > > removing
> > > > > > > > > the ambiguity entirely (it will be enabled or not). As a
> > > > > > > > > bonus for (b)
> > > > > > > > > we can switch everyone to IS_ENABLED(CONFIG_FOO) and match up
> > > > > > > > > with the
> > > > > > > > > Linux Kernel again. This solves (c) again by removing it
> > > > > > > > > entirely.
> > > > > > > >
> > > > > > > > The scheme I propose removes a-c also. I should have made that
> > > > > > > > clear.
> > > > > > >
> > > > > > > Er, ok. That's not how it looked before, but I guess I'm just
> > > > > > > mistaken.
> > > > > >
> > > > > > Yes I think so...it was a major goal to remove this stuff. [1] [2]
> > > > >
> > > > > Thanks.
> > > > >
> > > > > > > > There is not a huge difference between your scheme and mine. My
> > > > > > > > question is, how do you handle (d)?
> > > > > > >
> > > > > > > Well, either (d) isn't important as for example MMC wasn't a good
> > > > > > > choice
> > > > > > > in your proposal as virtually everyone "select MMC" today or it's
> > > > > > > handled more easily as my example above in SYS_MALLOC_LEN.
> > > > > > >
> > > > > > > > The way I see it, both schemes remove the ambiguity. Mine
> > > > > > > > retains a
> > > > > > > > single deconfig file and a single 'make menuconfig' for each
> > > > > > > > board.
> > > > > > > > Yours feels more like building independent U-Boot images.
> > > > > > >
> > > > > > > It is explicitly building independent U-Boot images, yes. With a
> > > > > > > wrapper
> > > > > > > around "make all of the images for a given platform". So much of
> > > > > > > our
> > > > > > > confusing and messy code is because we aren't doing that. And
> > > > > > > since most
> > > > > > > modern SoCs can work as (mostly )generic SPL selects correct DTB
> > > > > > > for PPL
> > > > > > > we really could have fewer overall build configurations.
> > > > > >
> > > > > > I'd really like to see a generic aarch64 U-Boot for PPL, although it
> > > > > > would be quite large with all the drivers. Perhaps we could start by
> > > > > > having a generic Rockchip one, for example.
> > > > > >
> > > > > > Still I don't see this being strongly related to the discussion
> > > > > > about
> > > > > > these two different schemes.
> > > > >
> > > > > Well, in your scheme how do we have say generic-aarch64_defconfig
> > > > > function on either chromebook_bob or am62x_beagleplay_a53 ? In mine,
> > > > > since everything is a separate build, generic-aarch64_defconfig has
> > > > > PPL=y, ARCH_K3=y and ROCKCHIP_RK3399=y. And then
> > > > > chromebook_bob_defconfig would say to use
> > > > > chromebook_bob_tpl_defconfig,
> > > > > generic-rk3399_spl_defconfig and generic-aarch64_defconfig. As a bonus
> > > > > instead of am62x_beagleplay_a53_defconfig and
> > > > > am62x_beagleplay_r5_defconfig we would have am62x_beagleplay_defconfig
> > > > > that would say to use the appropriate SPL/PPL for R5, and appropriate
> > > > > SPL/PPL for A53.
> > > > >
> > > > > But the one big huge caveat I want to make here is that "generic"
> > > > > images
> > > > > are useful in some use cases (I'm sure all of the regular F/OSS
> > > > > distributions would love a single actually common PPL if they can fit
> > > > > it) will strip things down. Whatever the IoT edge device closest to
> > > > > you
> > > > > now really won't want to ship with all the platforms enabled. Image
> > > > > size
> > > > > still matters.
> > > >
> > > > OK thanks for the details. I think I have a reasonable idea of what
> > > > you are proposing, now. It would work, but is quite radical, IMO.
> > > > That's not necessarily a bad thing, but in my mind I see a sequencing
> > > > possibility.
> > > >
> > > > A few points from my side:
> > > >
> > > > 1. I would love to see the defconfig files reduce in size, with more
> > > > and better defaults. One way to do this would be to enforce a maximum
> > > > length. I added a feature to qconfig to allow finding common options
> > > > among boards (the -i flag), but I'm not sure if many people use it.
> > >
> > > I don't see reducing defconfig size as important honestly. Should we
> > > have more and better defaults? Yes. But almost everything is under 200
> > > lines with the biggest (non-sandbox) ones being the generic zynqmp
> > > platform(s?).
> >
> > Agreed.
> >
> > >
> > > > 2. Generic boards is something I have been pushing for years (in fact
> > > > it is why I originally introduced devicetree), but I'm not seeing a
> > > > lot of traction.
> > >
> > > I don't think generic boards are universally helpful. Even if what I'm
> > > proposing would allow for more of it, below the PPL stage I'm not sure
> > > it's both feasible enough and useful enough for production. At the PPL
> > > stage it still has to be small enough and not overly burdensome. What we
> > > talked about on the call yesterday about using more multi-dtb images is
> > > a step in the right direction, yes.
> >
> > Agreed. Anway, we can create separate targets for generic boards if we want
> > to.
> >
> > >
> > > > 3. Iit seems that you want to remove all the 'if SPL' pieces and just
> > > > rely on the current PPL configuration. But how will that work? There
> > > > are tons of features which don't work in SPL, or are not relevant, or
> > > > have special 'small' versions. That is a *lot* of Kconfig refactoring
> > > > just to get something working, isn't it? With my scheme there is no
> > > > Kconfig change needed initially - it can be done later as needed /
> > > > desirable.
> > >
> > > I don't think we would remove most "if SPL" cases. Taking part of the
> > > current stanza for ROCKCHIP_RK3399 as an example:
> > > config ROCKCHIP_RK3399
> > > bool "Support Rockchip RK3399"
> > > select ARM64
> > > select SUPPORT_SPL
> > > select SUPPORT_TPL
> > > select SPL
> > > select SPL_ATF
> > > select SPL_BOARD_INIT if SPL
> > > ...
> > > select SPL_CLK if SPL
> > > ...
> > > select CLK
> > > ...
> > > imply TPL_CLK
> > >
> > >
> > > This would become:
> > > config ROCKCHIP_RK3399
> > > bool "Support Rockchip RK3399"
> > > select ARM64
> > > select SUPPORT_SPL
> > > select SUPPORT_TPL
> > > select SPL_ATF if SPL # TBD: Does 'ATF' make sense outside of SPL?
> > > select BOARD_INIT if SPL # Not TPL_BOARD_INIT here
> > > select CLK # imply was likely wrong before? Would need to check
> > > ...
> >
> > I was more talking about the large blocks of 'if SPL' - e.g. we have
> > common/spl/Kconfig and common/spl/Kconfig.tpl
>
> I would vastly reduce the contents within those 'if' blocks, but there
> are still options that are xPL-centric without a PPL counterpart, such
> as SPL_ATF (I suspect, but if not I'm sure others).
>
> > But just the level of thought required in your small example above
> > suggests it is a large effort.
>
> Yes, restructuring our Kconfig logic and then removing our xPL logic is
> some work. So was, I suspect, all of what you did already.
>
> > > > 4. My scheme splits the config into separate files. Yours makes the
> > >
> > > I don't see yours as splitting the configs in to separate files, I see
> > > it as generating some intermediate objects. The configs don't change and
> > > that's one of our problem areas.
> >
> > So you mean a big problem area is the current Kconfig?
>
> I mean it's a problem for users a board developers to make valid
> configurations and update them as needed. Filesystems are in the
> filesystem menu, unless they're SPL and then it's all under the big SPL
> menu.
>
> > Mind generates
> > out to an include/generated/autoconf_xxx for each phase. Yes they are
> > intermediate files and auto-generated, but each 100% controls its
> > phase, so there is no confusion and CONFIG_IS_ENABLED() / odd Makefile
> > rules anymore.
>
> Yes, removing CONFIG_IS_ENABLED and $(PHASE_)/$(XPL_) from Makefiles is
> good. But the intermediate files aren't going to help (nor hurt) any of
> the problems themselves. If you're reading those to figure out a
> problem, it's like when you're reading a .i file to figure out a
> problem, it means you're already in a complex troublesome spot.
>
> But I don't know that CONFIG_SPL_FS_FAT=y means that CONFIG_FS_FAT=y for
> SPL builds leads to "no confusion". But I do think that CONFIG_SPL=y and
> CONFIG_FS_FAT=y does.
>
> > > > split earlier, at the Kconfig level. So it seems that we could go with
> > > > my scheme to get us to a split config, then, after that, decide
> > > > whether to move that split earlier to Kconfig itself. The choices
> > >
> > > I don't think so. Yours makes things complicated by making the build do
> > > even more (and from the RFC, the implementation tooling diverges from
> > > upstream).
> >
> > Yes it makes the kconf tool generate those separate files for each phase [3]
> >
> > > Mine makes things differently complicated by doing less for
> > > most things, but needing some thought on how to know that say
> > > chromebook_bob needs chromebook_bob_tpl_defconfig,
> > > chromebook_bob_spl_defconfig and chromebook_bob_ppl_defconfig to be
> > > built, before asking binman to go put things together.
> >
> > Yours seems feasible in a fully Binman world, but given the difficulty
> > we (or I) have completing a migration, I honestly don't believe this
> > is feasible in today's U-Boot. The other problem is that it all has to
>
> I'm not 100% sure it's everything needs binman actually. Or even if we
> do take this as a reason to push for more binman, it's just some trivial
> types already handled in the Makefile that's missing.
>
> > be done at once. We need to rewrite the Kconfig and flip over the
> > board. Will we carry people with us? That is a huge risk to the
> > project IMO.
>
> I'm not sure, actually, that it couldn't be done in stages. We might
> need a little bit of fakery around being able to just build SPL without
> PPL in the interim.
>
> > Anyway, yes my schema makes the build do even more (with 400 lines of
> > kconf additions and a patch that can likely be upstreamed). But
> > otherwise, it is a one-off improvement, without any changes to the
> > existing Kconfig.
>
> I thought Yamada-san rejected changes going in this direction before?
> But either way, no it's not likely the final overburden in terms of
> divergence.
Yes. Masahiro will make his own decisions and I am confident he will
reject any future changes I send
>
> > So my point is that we could go with the first part of my scheme to
> > resolve the 'medium' problems then decide which way to continue after
> > that. From your side you won't have lost anything towards where you
> > want to head. The two options would then be:
> >
> > - exhance kconfig language to build in the notion of phases
> > - split the defconfigs for each board, redo the Kconfig rules and
> > teach the build to combine images
>
> If things go down your proposed path instead, no, I don't see that as
> making it meaningfully easier to go the way I proposed later. The only
> commonality is dropping $(PHASE_)/$(XPL_)/etc and CONFIG_IS_ENABLED ->
> IS_ENABLED. And (almost) all of that is a script'able change.
To be frank, the difference is that I have actually put in the work to
try this. It is more than 50 and perhaps as many as 100 patches. Quite
difficult work. Honestly, compared to that, the logic changes are not
that large.
That is why I believe this work is a prerequisite for both schemes
>
> > > > would then be to use your scheme (Kconfig refactoring, splitting
> > > > defconfigs and some rework), or to do my scheme (which would require
> > > > enhancing the Kconfig language a bit just for U-Boot and some optional
> > > > rework over time). Both schemes would need a small amount of
> > > > build-logic changes, but I'm not sure yet what that would look like.
> > > >
> > > > Does that sound right?
> > >
> > > With what I said above, yes I think we're closer at least to
> > > understanding each other.
> >
> > Yes.
>
> Well, with that, what now?
>
> What makes the current situation untenable is VPL. And I gather I
> haven't convinced you to put that on hold long enough to instead rework
> how we build things, have I?
Which VPL thing?
You have convinced me that you have a solution. It makes a lot more
sense to me than previously and it may be that it is better in the
end. For example, with VBE it I would make a lot of sense to build 20
boards as just TPL and use a generic rock chip board for everything
else. That would be a lot tidier with your scheme. It is very hard to
predict the future and VBE is still not finished, some two years in.
I don't want to be tied to your scheme today though.
So if you can accept my going ahead with 1-4 and helping me with that,
then we can stop and discuss which way to go, perhaps by prototyping
the two options?
Regards,
Simon
>
> --
> Tom
