On Mon, Feb 10, 2025 at 08:27:47AM +0100, Stefan Eichenberger wrote:
> From: Stefan Eichenberger <stefan.eichenber...@toradex.com>
>
> Add the dram_init_banksize function to the board file to properly set
> DRAM memory sizes during boot.
>
> The commit bc07851897bd ("board: ti: Pull redundant DDR functions to a
> common location and Fixup DDR size when ECC is enabled") relocated the
> dram_init_banksize function from architecture specific initialization to
> the TI board initialization code. As a result, boards relying on the
> previous setup now require this function to be defined within their
> board file to handle DRAM sizing correctly.
>
> Without this function defined the following error appears during boot:
> ERROR: Failed to allocate 0x1000 bytes below 0x0.
>
> Fixes: bc07851897bd ("board: ti: Pull redundant DDR functions to a common
> location and Fixup DDR size when ECC is enabled")
> Signed-off-by: Stefan Eichenberger <stefan.eichenber...@toradex.com>
Acked-by: Francesco Dolcini <francesco.dolc...@toradex.com>
