Hi, On 2025-02-09 17:58, Tom Rini wrote: > On Sun, Feb 09, 2025 at 07:28:38AM -0700, Simon Glass wrote: >> Hi Jonas, >> >> On Sat, 8 Feb 2025 at 15:49, Jonas Karlman <jo...@kwiboo.se> wrote: >>> >>> The PP1500 and PP3000 power rails must be on very early for the U-Boot >>> TPL and SPL banner to be shown on debug UART for bob and kevin. >>> >>> This series restore the early power on of these power rails in >>> board_debug_uart_init() for both TPL and SPL to restore the missing >>> U-Boot TPL/SPL banner. >>> >>> The reverted patches was introduced in v2024.04-rc1. >>> >>> Jonas Karlman (3): >>> Revert "rockchip: rk3399: Drop unneeded bob and kevin board specific >>> code" >>> rockchip: rk3399-gru: Enable TPL_GPIO for bob and kevin >>> Revert "rockchip: rk3399: Fix TPL build of bob and kevin" >>> >>> arch/arm/mach-rockchip/rk3399/rk3399.c | 23 ++++++++++++++++++++++- >>> configs/chromebook_bob_defconfig | 1 + >>> configs/chromebook_kevin_defconfig | 1 + >>> 3 files changed, 24 insertions(+), 1 deletion(-) >>> >>> -- >>> 2.48.1 >>> >> >> Thanks for figuring this out! I'll let Tom run this through the labs. > > You should test it when you rebase your work on top of master again. >
Simon did a test-run of these two reverts and the addition of TPL_GPIO and reported the result over IRC before I posted this series. See https://www.irccloud.com/pastebin/tYAxuilC/ $ pe e99d2863179 (HEAD) rockchip: rk3399: Enable TPL_GPIO for bob and kevin 0cf50ad5247 Revert "rockchip: rk3399: Fix TPL build of bob and kevin" 1973a377839 Revert "rockchip: rk3399: Drop unneeded bob and kevin board specific code" c2e00482d00 (us/master, us/WIP/06Feb2025) Merge tag 'xilinx-for-v2025.04-rc2' of https://source.denx.de/u-boot/custodians/u-boot-microblaze b3c09eb3652 (us/WIP/05Feb2025, tpm/master) arm64: configs: Remove SYS_BOOTM_LEN for TI devices 93bcabd9b24 arm: Correct dependency for STATIC_MACH_TYPE b16e1db2a07 armv7m: kconfig adds the NVIC option and masks the GIC option when NVIC is selected e335f1e3bea Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sh 0f019056b2d zynqmp: Save "bootseq" environment variable in decimal format eade90fd005 arm64: zynqmp: Describe images without TF-A $ ub-int bob Building U-Boot in sourcedir for chromebook_bob Bootstrapping U-Boot from dir /tmp/b/chromebook_bob Writing U-Boot using method em100 U-Boot TPL 2025.04-rc1-00144-ge99d28631796 (Feb 07 2025 - 07:09:15) Channel 0: LPDDR3, 933MHz BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB Channel 1: LPDDR3, 933MHz BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB 256B stride Trying to boot from BOOTROM Returning to boot ROM... U-Boot SPL 2025.04-rc1-00144-ge99d28631796 (Feb 07 2025 - 07:09:15 -0700) Bloblist at 100000 not found (err=-2) Trying to boot from SPI ## Checking hash(es) for config config-1 ... OK ## Checking hash(es) for Image atf-1 ... sha256+ OK ## Checking hash(es) for Image u-boot ... sha256+ OK ## Checking hash(es) for Image fdt-1 ... sha256+ OK Regards, Jonas
