On 24/05/11 20:54, Graeme Russ wrote: > There is no need to use set_timer() and reset_timer() and there are build > breakages occuring because of them (specifically cfi_flash). Remove any > usage outside arch/ to fix build breakages and to prepare for complete > removal > > The Nios2 timer implentation updates every 10ms (increases in 10ms steps) > and required a reset_timer() call before timing operations. For Nios2, call > reset_timer() when get_timer() is called with a parameter value of 0 > > Signed-off-by: Graeme Russ <graeme.r...@gmail.com> > > --- > checkpatch complains about long lines and brace usage in the board specific > flash.c files - They are deprecated and not worth fixing for style > > Changes since V1: > - Fix typo in commit message > - Add reset_timer() to Nios2 get_timer(0) > --- > arch/nios2/cpu/interrupts.c | 4 ++++ > board/BuS/EB+MCF-EV123/flash.c | 10 ++++++---- > board/cobra5272/flash.c | 10 ++++++---- > board/idmr/flash.c | 10 ++++++---- > drivers/block/mg_disk.c | 1 - > drivers/mtd/cfi_flash.c | 2 -- > 6 files changed, 22 insertions(+), 15 deletions(-)
Argh - Sorry about the subject - It should be [PATCH v2] Do I need to resend or will that make matters worse? Regards, Graeme _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
