Hi Tom,
please pull these patches to your tree. Nothing really significant there. Some
binman fixes which were not spot before and switching our platform to LWIP to
have cover it better.
Thanks,
Michal
The following changes since commit 97c125e6bb441a8062bdd28e82f17b1da1224416:
Gitlab: Add results.xml to the list of artifacts as well. (2025-02-04
11:57:36 -0600)
are available in the Git repository at:
g...@source.denx.de:u-boot/custodians/u-boot-microblaze.git
tags/xilinx-for-v2025.04-rc2
for you to fetch changes up to 0f019056b2d23aaa839fab31c016d73009870a23:
zynqmp: Save "bootseq" environment variable in decimal format (2025-02-05
16:22:55 +0100)
----------------------------------------------------------------
AMD/Xilinx changes for v2025.04-rc2
fpga:
- Cleanup help
- Show xilinx only options on Xilinx devices
ospi-versal:
- Fix alignment issue
- Fix cadence_qspi_flash_reset() prototype
zynqmp:
- Define usb_pgood_delay
- Fix bootseq number
versal:
- Fix mini_ospi configuration
versal2:
- Enable OPTEE
xilinx:
- Enable some flashes
- Clean up SYS_MALLOC_F_LEN Kconfig
- Some binman fixes
- DT updates
- Enable mkfwumdata compilation
- Enable meminfo command
- Switch to LWIP and enable HTTPS
----------------------------------------------------------------
Alexander Dahl (1):
fpga: Avoid ignored-qualifiers warning
Benjamin Szőke (1):
zynqmp: Save "bootseq" environment variable in decimal format
Ibai Erkiaga (5):
fpga: fix alignment on fpga cmd usage info
fpga: improve loads usage information
fpga: resort fpga commands
fpga: xilinx exclusive commands
fpga: add new symbol for fpga_loadb
Michal Simek (9):
xilinx: Remove SYS_MALLOC_F_LEN setup via board Kconfig
arm64: zynqmp: Describe ethernet controllers via aliases on SOM
xilinx: Enable mkfwumdata tool for a/b update
xilinx: Enable meminfo command with mapping
xilinx: Enable MBEDTLS/LWIP/WGET and WGET_HTTPS
fpga: Make do_fpga_loads() static
arm64: zynqmp: Fix TEE loading address and add hash
arm64: zynqmp: Use DTB address base from .config
arm64: zynqmp: Describe images without TF-A
Padmarao Begari (2):
spi: cadence_qspi: Fix OSPI DDR mode alignment issue
configs: versal: update initial stack pointer
Prasad Kummari (2):
configs: zynqmp: Add usb_pgood_delay for SOM boards
arm64: zynqmp: enable u-boot itb generation via binman if SPL is enabled
Venkatesh Yadav Abbarapu (3):
xilinx: Enable support for Infineon Octal flashes
arm64: versal2: Enable the OPTEE command
spi: cadence_qspi: Add missing prototype for cadence_qspi_flash_reset
arch/arm/dts/zynqmp-binman-som.dts | 19 +++++-
arch/arm/dts/zynqmp-binman.dts | 39 ++++++++----
arch/arm/dts/zynqmp-sck-kd-g-revA.dtso | 4 ++
arch/arm/dts/zynqmp-sck-kr-g-revA.dtso | 5 ++
arch/arm/dts/zynqmp-sck-kv-g-revA.dtso | 4 ++
arch/arm/dts/zynqmp-sck-kv-g-revB.dtso | 4 ++
arch/arm/mach-zynq/Kconfig | 3 -
arch/arm/mach-zynqmp-r5/Kconfig | 3 -
arch/arm/mach-zynqmp/Kconfig | 3 -
board/xilinx/zynqmp/zynqmp.c | 2 +-
board/xilinx/zynqmp/zynqmp_kria.env | 1 +
cmd/Kconfig | 35 ++++++-----
cmd/fpga.c | 65 +++++++++-----------
configs/amd_versal2_virt_defconfig | 15 ++---
configs/microblaze-generic_defconfig | 2 +
configs/xilinx_versal_mini_ospi_defconfig | 2 +-
configs/xilinx_versal_net_virt_defconfig | 13 ++--
configs/xilinx_versal_virt_defconfig | 14 ++---
configs/xilinx_zynq_virt_defconfig | 9 ++-
configs/xilinx_zynqmp_kria_defconfig | 17 ++---
configs/xilinx_zynqmp_virt_defconfig | 20 ++----
drivers/fpga/fpga.c | 14 ++---
drivers/spi/cadence_ospi_versal.c | 12 ++++
drivers/spi/cadence_qspi.h | 2 +-
include/configs/xilinx_zynqmp.h | 1 +
include/fpga.h | 6 +-
26 files changed, 177 insertions(+), 137 deletions(-)
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP/Versal ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal/Versal NET SoCs
TF-A maintainer - Xilinx ZynqMP/Versal/Versal NET SoCs
