Add the default configuration file for RPI5 board. To build u-boot for Raspberrypi 5 the following command should be used: > make rpi_arm64_defconfig CROSS_COMPILE=aarch64-linux-gnu-
Signed-off-by: Oleksii Moisieiev <oleksii_moisie...@epam.com> Reviewed-by: Volodymyr Babchuk <volodymyr_babc...@epam.com> --- configs/rpi_arm64_defconfig | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/configs/rpi_arm64_defconfig b/configs/rpi_arm64_defconfig index 02f942cf34..feeef14954 100644 --- a/configs/rpi_arm64_defconfig +++ b/configs/rpi_arm64_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_POSITION_INDEPENDENT=y CONFIG_ARCH_BCM283X=y +CONFIG_BCM2712=y CONFIG_TARGET_RPI_ARM64=y CONFIG_ENV_SIZE=0x4000 CONFIG_DEFAULT_DEVICE_TREE="bcm2711-rpi-4-b" @@ -56,3 +57,21 @@ CONFIG_SYS_WHITE_ON_BLACK=y CONFIG_VIDEO_BCM2835=y CONFIG_CONSOLE_SCROLL_LINES=10 CONFIG_PHYS_TO_BUS=y + +CONFIG_RESET_BRCMSTB=y +CONFIG_MFD_RP1=y + +CONFIG_PCI_PNP=y + +CONFIG_RESET_RASPBERRYPI=y +CONFIG_RESET_BRCMSTB_RESCAL=y + +CONFIG_MACB=y + +CONFIG_CLK=y +CONFIG_CLK_RP1=y +CONFIG_OF_REAL=y + +CONFIG_RP1_GPIO=y +CONFIG_BOARD_LATE_INIT=y +CONFIG_BOARD_TYPES=y -- 2.34.1
