Add bootstd information for VBE.
Signed-off-by: Simon Glass <s...@chromium.org>
---
arch/arm/dts/rockchip-u-boot.dtsi | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/arch/arm/dts/rockchip-u-boot.dtsi
b/arch/arm/dts/rockchip-u-boot.dtsi
index 8c6e62398a4..7cce213c32e 100644
--- a/arch/arm/dts/rockchip-u-boot.dtsi
+++ b/arch/arm/dts/rockchip-u-boot.dtsi
@@ -27,6 +27,33 @@
binman: binman {
multiple-images;
};
+
+#ifdef CONFIG_VPL
+ bootstd {
+ bootph-verify;
+ compatible = "u-boot,boot-std";
+
+ /*
+ * This is used for the VBE OS-request tests. A FAT filesystem
+ * created in a partition with the VBE information appearing
+ * before the partition starts.
+ *
+ * Offsets are aligned to the media block-size, typically 0x200
+ */
+ firmware0 {
+ bootph-verify;
+ compatible = "fwupd,vbe-simple";
+ storage = "mmc0";
+ skip-offset = <0x8000>;
+ area-start = <CONFIG_SPL_PAD_TO>;
+ area-size = <0x800000>;
+ state-offset = <(CONFIG_SPL_PAD_TO - 0x400)>;
+ state-size = <0x40>;
+ version-offset = <(CONFIG_SPL_PAD_TO - 0x200)>;
+ version-size = <0x100>;
+ };
+ };
+#endif
};
#ifdef CONFIG_SPL
--
2.43.0
