Add the missing properties for the pinctrl node and for its
corresponding GPIO bank nodes to align with the Linux DT.
Signed-off-by: Manikandan Muralidharan <manikanda...@microchip.com>
---
arch/arm/dts/sam9x60.dtsi | 25 ++++++++++++++++++++++++-
1 file changed, 24 insertions(+), 1 deletion(-)
diff --git a/arch/arm/dts/sam9x60.dtsi b/arch/arm/dts/sam9x60.dtsi
index 97d9c5cefc3..2a31152a0f7 100644
--- a/arch/arm/dts/sam9x60.dtsi
+++ b/arch/arm/dts/sam9x60.dtsi
@@ -212,43 +212,66 @@
pinctrl: pinctrl@fffff400 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "microchip,sam9x60-pinctrl",
"simple-bus";
+ compatible = "microchip,sam9x60-pinctrl",
"simple-mfd";
ranges = <0xfffff400 0xfffff400 0x800>;
reg = <0xfffff400 0x200 /* pioA */
0xfffff600 0x200 /* pioB */
0xfffff800 0x200 /* pioC */
0xfffffa00 0x200>; /* pioD */
+
+ /* mux-mask corresponding to sam9x60 SoC in
TFBGA228L package */
+ atmel,mux-mask = <
+ /* A B C
*/
+ 0xffffffff 0xffe03fff
0xef00019d /* pioA */
+ 0x03ffffff 0x02fc7e7f
0x00780000 /* pioB */
+ 0xffffffff 0xffffffff
0xf83fffff /* pioC */
+ 0x003fffff 0x003f8000
0x00000000 /* pioD */
+ >;
};
pioA: gpio@fffff400 {
compatible = "atmel,at91sam9x5-gpio",
"atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
};
pioB: gpio@fffff600 {
compatible = "atmel,at91sam9x5-gpio",
"atmel,at91rm9200-gpio";
reg = <0xfffff600 0x200>;
+ interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
gpio-controller;
+ #gpio-lines = <26>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
};
pioC: gpio@fffff800 {
compatible = "atmel,at91sam9x5-gpio",
"atmel,at91rm9200-gpio";
reg = <0xfffff800 0x200>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
};
pioD: gpio@fffffa00 {
compatible = "atmel,at91sam9x5-gpio",
"atmel,at91rm9200-gpio";
reg = <0xfffffa00 0x200>;
+ interrupts = <44 IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
gpio-controller;
+ #gpio-lines = <22>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
};
--
2.25.1
