The Serial Memory Mode (SMM) is enabled with atmel_qspi_set_cfg() on
each invocation of atmel_qspi_exec_op(). Setting SMM through
atmel_qspi_init() at probe time is redundant.
Removing the SMM setting at probe time should therefore 1) be safe to do
and 2) allows for setting it to a different value in a future
implementation of .xfer() which needs to disable SMM.
Signed-off-by: Alexander Dahl <a...@thorsis.com>
---
drivers/spi/atmel-quadspi.c | 5 -----
1 file changed, 5 deletions(-)
diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c
index 9e596b7448c..467f29c01ca 100644
--- a/drivers/spi/atmel-quadspi.c
+++ b/drivers/spi/atmel-quadspi.c
@@ -1052,11 +1052,6 @@ static int atmel_qspi_init(struct atmel_qspi *aq)
/* Reset the QSPI controller */
atmel_qspi_write(QSPI_CR_SWRST, aq, QSPI_CR);
- /* Set the QSPI controller by default in Serial Memory Mode */
- ret = atmel_qspi_set_serial_memory_mode(aq);
- if (ret < 0)
- return ret;
-
/* Enable the QSPI controller */
atmel_qspi_write(QSPI_CR_QSPIEN, aq, QSPI_CR);
--
2.39.5
