Hi Patrice,
On Wed, 15 Jan 2025 at 03:19, Patrice CHOTARD
<patrice.chot...@foss.st.com> wrote:
>
> Hi
>
> I am currently converting STM32MP platforms to OF_UPSTREAM.
> As we use same binary for several boards, flags
> CONFIG_OF_UPSTREAM_BUILD_VENDOR=y
> and CONFIG_OF_UPSTREAM_VENDOR="st" are set.
>
> So all dts/upstream/src/arm/st/* dts files are compiled.
>
> I am facing an issue with dts/upstream/src/arm/st/stm32mp151a-prtt1* and
> dts/upstream/src/arm/st/stm32mp15*-mec*.* files.
>
> To be more precise, these files are using a syntax which follows this
> format &{label/subnode} to override some nodes.
>
> This leads to DTC error:
>
> AR drivers/usb/gadget/built-in.o
> LD u-boot
> OBJCOPY u-boot.srec
> OBJCOPY u-boot-nodtb.bin
> SYM u-boot.sym
> DTC dts/upstream/src/arm/st/stm32mp157c-dhcom-picoitx.dtb
> DTC dts/upstream/src/arm/st/stm32h750i-art-pi.dtb
> DTC
> dts/upstream/src/arm/st/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dtb
> DTC dts/upstream/src/arm/st/stm32mp157a-iot-box.dtb
> DTC dts/upstream/src/arm/st/stm32746g-eval.dtb
> DTC dts/upstream/src/arm/st/stm32mp151c-mecio1r0.dtb
> DTC dts/upstream/src/arm/st/stm32mp157a-dhcor-avenger96.dtb
> DTC dts/upstream/src/arm/st/ste-nomadik-s8815.dtb
> Error: ../dts/upstream/src/arm/st/stm32mp15x-mecio1-io.dtsi:338.1-2 syntax
> error
> FATAL ERROR: Unable to parse input tree
>
>
> At line 338 in dts/upstream/src/arm/st/stm32mp15x-mecio1-io.dtsi we got :
>
> &{qspi_bk1_pins_a/pins} {
> pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */
> <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */
> <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */
> <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */
> /delete-property/ bias-disable;
> bias-pull-up;
> };
>
> If i update it as following , the DTC compilation is OK :
>
> &qspi_bk1_pins_a {
> pins {
> pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */
> <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */
> <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */
> <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */
> /delete-property/ bias-disable;
> bias-pull-up;
> };
> };
>
> On kernel side, the DTC compilation is ok, but not on U-Boot side. I am not
> able to understand the difference.
>
Could it be that the kernel dtc is newer?
You could try DTC=`which dtc` if you already have that in your system.
Regards,
Simon
