Add another nand write. variant, trimffs. This command will request of
nand_write_skip_bad() that all trailing all-0xff pages will be
dropped from eraseblocks when they are written to flash as-per the
reccommended behaviour of the UBI FAQ [1].

The function that implements this timming is the drop_ffs() function
by Artem Bityutskiy, ported from the mtd-utils tree.

[1] http://www.linux-mtd.infradead.org/doc/ubi.html#L_flasher_algo

Signed-off-by: Ben Gardiner <bengardi...@nanometrics.ca>
CC: Artem Bityutskiy <dedeki...@gmail.com>
CC: Detlev Zundel <d...@denx.de>

---

Detlev,
I did not do any erased-state checks since the implicit assumption
in other nand commands is that the user is required to do their
own erasing beforehand.

Changes since v1:
 * rebased to HEAD of git://git.denx.de/u-boot-nand-flash.git : ff7b4a0
   ("env_nand: zero-initialize variable nand_erase_options")
 * renamed the command variant to '.trimffs' from '.ubi' (Detlev Zundel)
 * added attribution to mtd-utils and Artem Bityutskiy in both the source
   comments and commit message
 * wrapped the new command in a new ifdef, CONFIG_CMD_NAND_TRIMFFS, to
   reduce the size impact of this new feature

---
 common/cmd_nand.c            |   16 ++++++++++++++++
 drivers/mtd/nand/nand_util.c |    3 +++
 2 files changed, 19 insertions(+), 0 deletions(-)

diff --git a/common/cmd_nand.c b/common/cmd_nand.c
index cb752c1..51d726c 100644
--- a/common/cmd_nand.c
+++ b/common/cmd_nand.c
@@ -576,6 +576,16 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char * 
const argv[])
                                ret = nand_write_skip_bad(nand, off, &rwsize,
                                                          (u_char *)addr,
                                                          WITH_DEFAULTS);
+#ifdef CONFIG_CMD_NAND_TRIMFFS
+               } else if (!strcmp(s, ".trimffs")) {
+                       if (read) {
+                               printf("Unknown nand command suffix '%s'\n", s);
+                               return 1;
+                       }
+                       ret = nand_write_skip_bad(nand, off, &rwsize,
+                                               (u_char *)addr,
+                                               WITH_DROP_FFS);
+#endif
 #ifdef CONFIG_CMD_NAND_YAFFS
                } else if (!strcmp(s, ".yaffs")) {
                        if (read) {
@@ -690,6 +700,12 @@ U_BOOT_CMD(
        "nand write - addr off|partition size\n"
        "    read/write 'size' bytes starting at offset 'off'\n"
        "    to/from memory address 'addr', skipping bad blocks.\n"
+#ifdef CONFIG_CMD_NAND_TRIMFFS
+       "nand write.trimffs - addr off|partition size\n"
+       "    write 'size' bytes starting at offset 'off' from memory address\n"
+       "    'addr', skipping bad blocks and dropping any pages at the end\n"
+       "    of eraseblocks that contain only 0xFF\n"
+#endif
 #ifdef CONFIG_CMD_NAND_YAFFS
        "nand write.yaffs - addr off|partition size\n"
        "    write 'size' bytes starting at offset 'off' with yaffs format\n"
diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c
index 2bfe743..357f332 100644
--- a/drivers/mtd/nand/nand_util.c
+++ b/drivers/mtd/nand/nand_util.c
@@ -11,6 +11,9 @@
  *             nandwrite.c by Steven J. Hill (sjh...@realitydiluted.com)
  *                            and Thomas Gleixner (t...@linutronix.de)
  *
+ * Copyright (C) 2008 Nokia Corporation: drop_ffs() function by
+ * Artem Bityutskiy <dedeki...@gmail.com> from mtd-utils
+ *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
-- 
1.7.4.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to