Hi Tianling,
On 12/26/24 10:20 AM, Tianling Shen wrote:
The NanoPi R3S(as "R3S") is an open source platform with dual-Gbps
Ethernet ports designed and developed by FriendlyElec for IoT
applications.
Specification:
- Rockchip RK3566
- 2GB LPDDR4X RAM
- optional 32GB eMMC module
- SD card slot
- 2x 1000 Base-T
- 3x LEDs (POWER, LAN, WAN)
- 2x Buttons (Reset, MaskROM)
- 1x USB 3.0 Port
- Type-C 5V 2A Power
Signed-off-by: Tianling Shen <cns...@gmail.com>
---
arch/arm/dts/rk3566-nanopi-r3s-u-boot.dtsi | 8 +++
board/rockchip/evb_rk3568/MAINTAINERS | 7 ++
configs/nanopi-r3s-rk3566_defconfig | 74 ++++++++++++++++++++++
doc/board/rockchip/rockchip.rst | 1 +
4 files changed, 90 insertions(+)
create mode 100644 arch/arm/dts/rk3566-nanopi-r3s-u-boot.dtsi
create mode 100644 configs/nanopi-r3s-rk3566_defconfig
diff --git a/arch/arm/dts/rk3566-nanopi-r3s-u-boot.dtsi
b/arch/arm/dts/rk3566-nanopi-r3s-u-boot.dtsi
new file mode 100644
index 0000000000..b66e5015d6
--- /dev/null
+++ b/arch/arm/dts/rk3566-nanopi-r3s-u-boot.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "rk356x-u-boot.dtsi"
+
+&vcc5v0_usb {
+ /delete-property/ regulator-always-on;
+ /delete-property/ regulator-boot-on;
+};
Please justify this change, this seems very odd.
diff --git a/board/rockchip/evb_rk3568/MAINTAINERS
b/board/rockchip/evb_rk3568/MAINTAINERS
index 588134ecb2..b2780401a3 100644
--- a/board/rockchip/evb_rk3568/MAINTAINERS
+++ b/board/rockchip/evb_rk3568/MAINTAINERS
@@ -28,6 +28,13 @@ F: configs/lubancat-2-rk3568_defconfig
F: arch/arm/dts/rk3568-lubancat-2.dts
F: arch/arm/dts/rk3568-lubancat-2-u-boot.dtsi
+NANOPI-R3S
+M: Tianling Shen <cns...@gmail.com>
+R: Jonas Karlman <jo...@kwiboo.se>
+S: Maintained
+F: configs/nanopi-r3s-rk3566_defconfig
+F: arch/arm/dts/rk3566-nanopi-r3s-u-boot.dtsi
+
NANOPI-R5C
M: Tianling Shen <cns...@gmail.com>
R: Jonas Karlman <jo...@kwiboo.se>
diff --git a/configs/nanopi-r3s-rk3566_defconfig
b/configs/nanopi-r3s-rk3566_defconfig
new file mode 100644
index 0000000000..f21c703ca7
--- /dev/null
+++ b/configs/nanopi-r3s-rk3566_defconfig
@@ -0,0 +1,74 @@
+CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_COUNTER_FREQUENCY=24000000
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3566-nanopi-r3s"
+CONFIG_ROCKCHIP_RK3568=y
+CONFIG_SPL_SERIAL=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_DEBUG_UART_BASE=0xFE660000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_PCI=y
+CONFIG_DEBUG_UART=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_FIT_SIGNATURE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_LEGACY_IMAGE_FORMAT=y
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-nanopi-r3s.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_MAX_SIZE=0x40000
+CONFIG_SPL_PAD_TO=0x7f8000
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_SPL_ATF=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+# CONFIG_SPL_DOS_PARTITION is not set
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_LIVE=y
+CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks
assigned-clock-rates assigned-clock-parents"
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SPL_SYSCON=y
+CONFIG_SPL_CLK=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_MISC=y
+CONFIG_SUPPORT_EMMC_RPMB=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DWC_ETH_QOS=y
+CONFIG_DWC_ETH_QOS_ROCKCHIP=y
+CONFIG_RTL8169=y
+CONFIG_NVME_PCI=y
I didn't see any PCIe connector for an NVMe on the R3S[1]? Did I miss
something? The wiki seems to indicate there may be an NVME but that
could be just a bad copy-pasting[2]?
[1] https://wiki.friendlyelec.com/wiki/index.php/NanoPi_R3S
[2]
https://wiki.friendlyelec.com/wiki/index.php/NanoPi_R3S#Expand_Docker_Storage
Cheers,
Quentin
