On Thu, 9 Jan 2025 at 10:56, Varadarajan Narayanan <quic_var...@quicinc.com> wrote: > > Introduce a defconfig for the Ride R3 and other QCS9100 boards with a > dedicated uefi partition. These can replace EDK2 entirely with U-Boot. > > Signed-off-by: Varadarajan Narayanan <quic_var...@quicinc.com> > --- > v2: Use qcs9100-ride-r3 for default DT instead of sa8775p-ride-r3 > --- > configs/qcs9100_defconfig | 24 ++++++++++++++++++++++++ > 1 file changed, 24 insertions(+) > create mode 100644 configs/qcs9100_defconfig > > diff --git a/configs/qcs9100_defconfig b/configs/qcs9100_defconfig > new file mode 100644 > index 00000000000..7e72c64968b > --- /dev/null > +++ b/configs/qcs9100_defconfig > @@ -0,0 +1,24 @@ > +# Configuration for building U-Boot to be flashed > +# to the uefi partition of QCS9100 based dev boards with > +# the "Linux Embedded" partition layout (which have > +# a dedicated "uefi" partition for edk2/U-Boot) > + > +#include "qcom_defconfig" > + > +# Otherwise buildman thinks this isn't an ARM platform > +CONFIG_ARM=y
This is already defined in qcom_defconfig. > + > +CONFIG_DEBUG_UART=y > +CONFIG_DEBUG_UART_ANNOUNCE=y > +CONFIG_DEBUG_UART_BASE=0xA8C000 > +CONFIG_DEBUG_UART_MSM_GENI=y > +CONFIG_DEBUG_UART_CLOCK=14745600 > + > +# Address where U-Boot will be loaded > +CONFIG_TEXT_BASE=0xaf000000 > +CONFIG_REMAKE_ELF=y > + > +CONFIG_DEFAULT_DEVICE_TREE="qcom/qcs9100-ride-r3" > + > +CONFIG_PHY_QCOM_QMP_UFS=y > +CONFIG_QCOM_UFS=y Again, these are already defined in qcom_defconfig. -Sumit > -- > 2.34.1 >
