Add "bootph-all" property to necessary nodes required for Ethernet boot starting from R5 SPL stage.
Signed-off-by: Chintan Vankar <c-van...@ti.com> --- The changed made by this patch can be dropped in the future when the DT-sync is performed with upstream linux. Linux patch for the same is posted at: https://lore.kernel.org/r/20250106123122.3531845-3-c-van...@ti.com/ arch/arm/dts/k3-am62p5-sk-u-boot.dtsi | 32 +++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/arch/arm/dts/k3-am62p5-sk-u-boot.dtsi b/arch/arm/dts/k3-am62p5-sk-u-boot.dtsi index cf087c6e343..be62cac7694 100644 --- a/arch/arm/dts/k3-am62p5-sk-u-boot.dtsi +++ b/arch/arm/dts/k3-am62p5-sk-u-boot.dtsi @@ -16,3 +16,35 @@ &dmsc { bootph-pre-ram; }; + +&cpsw_mac_syscon { + bootph-all; +}; + +&cpsw_port1 { + bootph-all; +}; + +&main_pktdma { + bootph-all; +}; + +&main_rgmii1_pins_default { + bootph-all; +}; + +&main_mdio1_pins_default { + bootph-all; +}; + +&cpsw3g_phy0 { + bootph-all; +}; + +&cpsw3g_mdio { + bootph-all; +}; + +&phy_gmii_sel { + bootph-all; +}; -- 2.34.1