On Fri, 20 Dec 2024 at 22:26, Tom Rini <tr...@konsulko.com> wrote: > At this point in time, DM is always enabled. So if MMC is enabled, it > should select DM_MMC. No drivers need to depend on DM_MMC being enabled > now, so remove that from dependency lists. This now means that a number > of platforms which select'd DM_MMC need to select MMC instead. > > Signed-off-by: Tom Rini <tr...@konsulko.com> > Reviewed-by: Peter Robinson <pbrobin...@gmail.com>
Looks sane based on my Kconfig knowledge. > --- > Cc: "NXP i.MX U-Boot Team" <uboot-...@nxp.com> > Cc: Fabio Estevam <feste...@gmail.com> > Cc: Minkyu Kang <mk7.k...@samsung.com> > Cc: Rayagonda Kokatanur <rayagonda.kokata...@broadcom.com> > Cc: Stefano Babic <sba...@denx.de> > Cc: Svyatoslav Ryhel <clamo...@gmail.com> > Cc: Thierry Reding <tred...@nvidia.com> > --- > arch/Kconfig | 2 +- > arch/arm/Kconfig | 18 +++------ > arch/arm/mach-exynos/Kconfig | 8 ++-- > arch/arm/mach-imx/mx5/Kconfig | 2 +- > arch/arm/mach-imx/mx6/Kconfig | 32 +++++++-------- > arch/arm/mach-omap2/omap3/Kconfig | 2 +- > arch/arm/mach-s5pc1xx/Kconfig | 2 +- > arch/arm/mach-tegra/Kconfig | 2 +- > drivers/mmc/Kconfig | 65 +++++++++++-------------------- > 9 files changed, 52 insertions(+), 81 deletions(-) > > diff --git a/arch/Kconfig b/arch/Kconfig > index 6258788f53ff..44ae4b3babdf 100644 > --- a/arch/Kconfig > +++ b/arch/Kconfig > @@ -172,13 +172,13 @@ config SANDBOX > select DM_GPIO > select DM_I2C > select DM_KEYBOARD > - select DM_MMC > select DM_SERIAL > select DM_SPI > select DM_SPI_FLASH > select GZIP_COMPRESSED > select IO_TRACE > select LZO > + select MMC > select MTD > select OF_BOARD_SETUP > select PCI_ENDPOINT > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig > index ea414fe376a8..ea256f687867 100644 > --- a/arch/arm/Kconfig > +++ b/arch/arm/Kconfig > @@ -1163,7 +1163,6 @@ config ARCH_SUNXI > select DM_SPI if SPI > select DM_SPI_FLASH if SPI && MTD > select DM_KEYBOARD > - select DM_MMC if MMC > select DM_SERIAL > select OF_BOARD_SETUP > select OF_CONTROL > @@ -1211,7 +1210,6 @@ config ARCH_U8500 > select CPU_V7A > select DM > select DM_GPIO > - select DM_MMC if MMC > select DM_SERIAL > select DM_USB_GADGET if DM_USB > select OF_CONTROL > @@ -1236,7 +1234,6 @@ config ARCH_VERSAL > select ARM64 > select CLK > select DM > - select DM_MMC if MMC > select DM_SERIAL > select GICV3 > select OF_CONTROL > @@ -1249,7 +1246,6 @@ config ARCH_VERSAL2 > select ARM64 > select CLK > select DM > - select DM_MMC if MMC > select DM_SERIAL > select OF_CONTROL > imply BOARD_LATE_INIT > @@ -1261,7 +1257,6 @@ config ARCH_VERSAL_NET > select ARM64 > select CLK > select DM > - select DM_MMC if MMC > select DM_SERIAL > select OF_CONTROL > imply BOARD_LATE_INIT > @@ -1286,7 +1281,6 @@ config ARCH_ZYNQ > select CPU_V7A > select DEBUG_UART_BOARD_INIT if SPL && DEBUG_UART > select DM > - select DM_MMC if MMC > select DM_SERIAL > select DM_SPI > select DM_SPI_FLASH > @@ -1315,7 +1309,6 @@ config ARCH_ZYNQMP_R5 > select CLK > select CPU_V7R > select DM > - select DM_MMC if MMC > select DM_SERIAL > select OF_CONTROL > imply CMD_DM > @@ -1329,7 +1322,6 @@ config ARCH_ZYNQMP > select DM > select DEBUG_UART_BOARD_INIT if SPL && DEBUG_UART > imply DM_MAILBOX > - select DM_MMC if MMC > select DM_SERIAL > select MTD > select DM_SPI if SPI > @@ -1397,8 +1389,8 @@ config TARGET_TOTAL_COMPUTE > select PL01X_SERIAL > select DM > select DM_SERIAL > - select DM_MMC > select DM_GPIO > + select MMC > imply OF_HAS_PRIOR_STAGE > imply MISC_INIT_R > > @@ -1904,7 +1896,7 @@ config TARGET_SL28 > select DM > select DM_GPIO > select DM_I2C > - select DM_MMC > + select MMC > select MTD > select DM_SPI_FLASH > select DM_MDIO > @@ -1945,10 +1937,10 @@ config ARCH_UNIPHIER > select DM > select DM_GPIO > select DM_I2C > - select DM_MMC > select DM_MTD > select DM_RESET > select DM_SERIAL > + select MMC > select OF_BOARD_SETUP > select OF_CONTROL > select OF_LIBFDT > @@ -1992,9 +1984,9 @@ config ARCH_STI > select BLK > select CPU_V7A > select DM > - select DM_MMC > select DM_RESET > select DM_SERIAL > + select MMC > imply CMD_DM > help > Support for STMicroelectronics STiH407/10 SoC family. > @@ -2041,7 +2033,6 @@ config ARCH_ROCKCHIP > select DM > select DM_GPIO > select DM_I2C > - select DM_MMC > select DM_PWM > select DM_REGULATOR > select DM_SERIAL > @@ -2050,6 +2041,7 @@ config ARCH_ROCKCHIP > select DM_USB_GADGET if USB_DWC3_GADGET > select ENABLE_ARM_SOC_BOOT0_HOOK > select OF_CONTROL > + select MMC > select MTD > select SPI > select SPL_DM if SPL > diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig > index 3fee5a4299b8..7e6959510087 100644 > --- a/arch/arm/mach-exynos/Kconfig > +++ b/arch/arm/mach-exynos/Kconfig > @@ -19,7 +19,7 @@ config ARCH_EXYNOS4 > select BOARD_EARLY_INIT_F > select CPU_V7A > select BLK > - select DM_MMC > + select MMC > help > Samsung Exynos4 SoC family are based on ARM Cortex-A9 CPU. There > are multiple SoCs in this family including Exynos4210, > Exynos4412, > @@ -40,7 +40,7 @@ config ARCH_EXYNOS5 > imply USB_ETHER_RTL8152 > imply USB_ETHER_SMSC95XX > select BLK > - select DM_MMC > + select MMC > > help > Samsung Exynos5 SoC family are based on ARM Cortex-A15 CPU (and > @@ -52,7 +52,7 @@ config ARCH_EXYNOS7 > select ARM64 > select BOARD_EARLY_INIT_F > select BLK > - select DM_MMC > + select MMC > help > Samsung Exynos7 SoC family are based on ARM Cortex-A57 CPU or > Cortex-A53 CPU (and some in a big.LITTLE configuration). There > are > @@ -62,7 +62,7 @@ config ARCH_EXYNOS9 > bool "Exynos9 SoC family" > select ARM64 > select BLK > - select DM_MMC > + select MMC > help > Samsung Exynos9 SoC family are based on ARMv8 Cortex CPU. There > are > multiple SoCs in this family including Exynos850. > diff --git a/arch/arm/mach-imx/mx5/Kconfig b/arch/arm/mach-imx/mx5/Kconfig > index d282663dcf1f..4d1e07b14d32 100644 > --- a/arch/arm/mach-imx/mx5/Kconfig > +++ b/arch/arm/mach-imx/mx5/Kconfig > @@ -26,9 +26,9 @@ config TARGET_KP_IMX53 > select DM_I2C > select DM_PMIC > select DM_SERIAL > - select DM_MMC > select BLK > select DM_REGULATOR > + select MMC > select MX53 > imply CMD_DM > > diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig > index 1f8022ee6853..4020e16d92dc 100644 > --- a/arch/arm/mach-imx/mx6/Kconfig > +++ b/arch/arm/mach-imx/mx6/Kconfig > @@ -81,8 +81,8 @@ config MX6UL_OPOS6UL > select BOARD_LATE_INIT > select DM > select DM_GPIO > - select DM_MMC > select DM_THERMAL > + select MMC > select SPL_DM if SPL > select SPL_OF_CONTROL if SPL > select SPL_PINCTRL if SPL > @@ -176,9 +176,9 @@ config TARGET_DART_6UL > select DM > select DM_GPIO > select DM_I2C > - select DM_MMC > select DM_SERIAL > select DM_THERMAL > + select MMC > select SUPPORT_SPL > > config TARGET_DHCOMIMX6 > @@ -197,10 +197,10 @@ config TARGET_DISPLAY5 > depends on MX6Q > select DM > select DM_I2C > - select DM_MMC > select DM_SPI > select DM_GPIO > select DM_SERIAL > + select MMC > select MTD > select SUPPORT_SPL > imply CMD_DM > @@ -245,7 +245,7 @@ config TARGET_KOSAGI_NOVENA > bool "Kosagi Novena" > select BOARD_LATE_INIT > select DM_GPIO > - select DM_MMC > + select MMC > select PCI > select SCSI > select VIDEO > @@ -280,8 +280,8 @@ config TARGET_MX6LOGICPD > select DM > select DM_GPIO > select DM_I2C > - select DM_MMC > select DM_PMIC > + select MMC > select OF_CONTROL > imply CMD_DM > > @@ -300,10 +300,10 @@ config TARGET_MX6DL_MAMOJ > select DM > select DM_GPIO > select DM_I2C > - select DM_MMC > select DM_PMIC > select DM_PMIC_PFUZE100 > select DM_THERMAL > + select MMC > select OF_CONTROL > select PINCTRL > select SPL > @@ -332,8 +332,8 @@ config TARGET_MX6Q_ENGICAM > select DM > select DM_GPIO > select DM_I2C > - select DM_MMC > select DM_THERMAL > + select MMC > select OF_CONTROL > select SPL_DM if SPL > select SPL_OF_CONTROL if SPL > @@ -352,8 +352,8 @@ config TARGET_MX6Q_ACC > select DM > select DM_GPIO > select DM_I2C > - select DM_MMC > select DM_THERMAL > + select MMC > select SUPPORT_SPL > > config TARGET_MX6S_SIELAFF > @@ -453,8 +453,8 @@ config TARGET_MX6UL_ENGICAM > select DM > select DM_GPIO > select DM_I2C > - select DM_MMC > select DM_THERMAL > + select MMC > select OF_CONTROL > select SPL_DM if SPL > select SPL_OF_CONTROL if SPL > @@ -490,9 +490,9 @@ config TARGET_MYS_6ULX > select DM > select DM_GPIO > select DM_I2C > - select DM_MMC > select DM_SERIAL > select DM_THERMAL > + select MMC > select SUPPORT_SPL > > config TARGET_NITROGEN6X > @@ -507,10 +507,10 @@ config TARGET_NPI_IMX6ULL > bool "Seeed NPI-IMX6ULL" > depends on MX6ULL > select DM > - select DM_MMC > select DM_GPIO > select DM_SERIAL > select DM_THERMAL > + select MMC > select SUPPORT_SPL > > config TARGET_OPOS6ULDEV > @@ -566,9 +566,9 @@ config TARGET_PCL063 > select DM > select DM_GPIO > select DM_I2C > - select DM_MMC > select DM_SERIAL > select DM_THERMAL > + select MMC > select SUPPORT_SPL > > config TARGET_PCL063_ULL > @@ -577,9 +577,9 @@ config TARGET_PCL063_ULL > select DM > select DM_GPIO > select DM_I2C > - select DM_MMC > select DM_SERIAL > select DM_THERMAL > + select MMC > select SUPPORT_SPL > > config TARGET_SOMLABS_VISIONSOM_6ULL > @@ -588,9 +588,9 @@ config TARGET_SOMLABS_VISIONSOM_6ULL > select BOARD_LATE_INIT > select DM > select DM_GPIO > - select DM_MMC > select DM_SERIAL > select DM_THERMAL > + select MMC > imply CMD_DM > > config TARGET_TBS2910 > @@ -605,7 +605,7 @@ config TARGET_KP_IMX6Q_TPC > select DM > select SPL_DM if SPL > select DM_THERMAL > - select DM_MMC > + select MMC > select DM_REGULATOR > select SPL_DM_REGULATOR if SPL > select DM_SERIAL > @@ -673,7 +673,7 @@ config TARGET_BRPPT2 > select DM > select DM_GPIO > select DM_I2C > - select DM_MMC > + select MMC > select SUPPORT_SPL > select SPL_DM if SPL > select SPL_OF_CONTROL if SPL > diff --git a/arch/arm/mach-omap2/omap3/Kconfig > b/arch/arm/mach-omap2/omap3/Kconfig > index f15f44fe7d4b..a175e5ce6edc 100644 > --- a/arch/arm/mach-omap2/omap3/Kconfig > +++ b/arch/arm/mach-omap2/omap3/Kconfig > @@ -30,8 +30,8 @@ config TARGET_AM3517_EVM > select DM > select DM_GPIO > select DM_I2C > - select DM_MMC > select DM_SERIAL > + select MMC > imply CMD_DM > > config TARGET_CM_T35 > diff --git a/arch/arm/mach-s5pc1xx/Kconfig b/arch/arm/mach-s5pc1xx/Kconfig > index b6a4b0b653fb..b15b2e7b6a01 100644 > --- a/arch/arm/mach-s5pc1xx/Kconfig > +++ b/arch/arm/mach-s5pc1xx/Kconfig > @@ -8,8 +8,8 @@ config TARGET_S5P_GONI > bool "S5P Goni board" > select OF_CONTROL > select BLK > - select DM_MMC > select MISC_COMMON > + select MMC > > config TARGET_SMDKC100 > bool "Support smdkc100 board" > diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig > index 04612895576a..78b89729f191 100644 > --- a/arch/arm/mach-tegra/Kconfig > +++ b/arch/arm/mach-tegra/Kconfig > @@ -48,13 +48,13 @@ config TEGRA_COMMON > select DM_GPIO > select DM_I2C > select DM_KEYBOARD > - select DM_MMC > select DM_PWM > select DM_RESET > select DM_SERIAL > select DM_SPI > select DM_SPI_FLASH > select MISC > + select MMC > select MTD > select OF_CONTROL > select SPI > diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig > index 9f2fecce3826..46513db0d6e3 100644 > --- a/drivers/mmc/Kconfig > +++ b/drivers/mmc/Kconfig > @@ -3,7 +3,7 @@ menu "MMC Host controller Support" > config MMC > bool "MMC/SD/SDIO card support" > default ARM || PPC || SANDBOX > - select DM_MMC if DM > + select DM_MMC > help > This selects MultiMediaCard, Secure Digital and Secure > Digital I/O support. > @@ -39,14 +39,14 @@ config MMC_BROKEN_CD > If card detection feature is broken, just poll to detect. > > config DM_MMC > - bool "Enable MMC controllers using Driver Model" > + bool > depends on DM > help > - This enables the MultiMediaCard (MMC) uclass which supports MMC > and > - Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, > etc.) > - and non-removable (e.g. eMMC chip) devices are supported. These > - appear as block devices in U-Boot and can support filesystems > such > - as EXT4 and FAT. > + This enables the MultiMediaCard (MMC) driver model uclass which > + supports MMC and Secure Digital I/O (SDIO) cards. Both removable > (SD, > + micro-SD, etc.) and non-removable (e.g. eMMC chip) devices are > + supported. These appear as block devices in U-Boot and can > support > + filesystems such as EXT4 and FAT. > > config SPL_DM_MMC > bool "Enable MMC controllers using Driver Model in SPL" > @@ -79,7 +79,7 @@ config MMC_SDHCI_ADMA_HELPERS > > config MMC_SPI > bool "Support for SPI-based MMC controller" > - depends on DM_MMC && DM_SPI > + depends on DM_SPI > help > This selects SPI-based MMC controllers. > If you have an MMC controller on a SPI bus, say Y here. > @@ -97,7 +97,6 @@ config MMC_SPI_CRC_ON > > config ARM_PL180_MMCI > bool "ARM AMBA Multimedia Card Interface and compatible support" > - depends on DM_MMC > help > This selects the ARM(R) AMBA(R) PrimeCell Multimedia Card > Interface (PL180, PL181 and compatible) support. > @@ -258,7 +257,6 @@ config MMC_DW > > config MMC_DW_CORTINA > bool "Cortina specific extensions for Synopsys DW Memory Card > Interface" > - depends on DM_MMC > depends on MMC_DW > help > This selects support for Cortina SoC specific extensions to the > @@ -285,7 +283,7 @@ config MMC_DW_K3 > > config MMC_DW_ROCKCHIP > bool "Rockchip SD/MMC controller support" > - depends on DM_MMC && OF_CONTROL > + depends on OF_CONTROL > depends on MMC_DW > help > This enables support for the Rockchip SD/MMM controller, which is > @@ -306,7 +304,6 @@ config MMC_DW_SOCFPGA > config MMC_DW_SNPS > bool "Extensions for DW Memory Card Interface used in Synopsys ARC > devboards" > depends on MMC_DW > - depends on DM_MMC > depends on OF_CONTROL > depends on CLK > help > @@ -317,13 +314,12 @@ config NEXELL_DWMMC > bool "Nexell SD/MMC controller support" > depends on ARCH_NEXELL > depends on MMC_DW > - depends on DM_MMC > depends on PINCTRL_NEXELL > default y > > config MMC_MESON_GX > bool "Meson GX EMMC controller support" > - depends on DM_MMC && ARCH_MESON > + depends on ARCH_MESON > help > Support for EMMC host controller on Meson GX ARM SoCs platform > (S905) > > @@ -338,7 +334,7 @@ config MMC_MXC > > config MMC_OWL > bool "Actions OWL Multimedia Card Interface support" > - depends on ARCH_OWL && DM_MMC > + depends on ARCH_OWL > help > This selects the OWL SD/MMC host controller found on board > based on Actions S700/S900 SoC. > @@ -366,7 +362,6 @@ config MMC_PCI > config MMC_OCTEONTX > bool "Marvell Octeon Multimedia Card Interface support" > depends on (ARCH_OCTEON || ARCH_OCTEONTX || ARCH_OCTEONTX2) > - depends on DM_MMC > select MMC_SUPPORTS_TUNING if ARCH_OCTEONTX2 > help > This selects the Octeon Multimedia card Interface. > @@ -377,7 +372,7 @@ config MMC_OCTEONTX > > config MVEBU_MMC > bool "Kirkwood MMC controller support" > - depends on DM_MMC && ARCH_KIRKWOOD > + depends on ARCH_KIRKWOOD > help > Support for MMC host controller on Kirkwood SoCs. > If you are on a Kirkwood architecture, say Y here. > @@ -386,8 +381,7 @@ config MVEBU_MMC > > config MMC_OMAP_HS > bool "TI OMAP High Speed Multimedia Card Interface support" > - select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR > - select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR > + select DM_REGULATOR_PBIAS if DM_REGULATOR > help > This selects the TI OMAP High Speed Multimedia card Interface. > If you have an omap2plus board with a Multimedia Card slot, > @@ -430,7 +424,6 @@ config SH_MMCIF > config MMC_UNIPHIER > bool "UniPhier SD/MMC Host Controller support" > depends on ARCH_UNIPHIER > - depends on DM_MMC > depends on OF_CONTROL > help > This selects support for the Matsushita SD/MMC Host Controller on > @@ -439,7 +432,6 @@ config MMC_UNIPHIER > config RENESAS_SDHI > bool "Renesas R-Car SD/MMC Host Controller support" > depends on ARCH_RENESAS > - depends on DM_MMC > depends on OF_CONTROL > select BOUNCE_BUFFER > help > @@ -449,7 +441,6 @@ config RENESAS_SDHI > config MMC_BCM2835 > bool "BCM2835 family custom SD/MMC Host Controller support" > depends on ARCH_BCM283X > - depends on DM_MMC > depends on OF_CONTROL > default y > help > @@ -469,7 +460,7 @@ config JZ47XX_MMC > config MMC_SANDBOX > bool "Sandbox MMC support" > depends on SANDBOX > - depends on DM_MMC && OF_CONTROL > + depends on OF_CONTROL > help > This select a dummy sandbox MMC driver. At present this does > nothing > other than allow sandbox to be build with MMC support. This > @@ -559,7 +550,6 @@ config FIXED_SDHCI_ALIGNED_BUFFER > config MMC_SDHCI_ASPEED > bool "Aspeed SDHCI controller" > depends on ARCH_ASPEED > - depends on DM_MMC > depends on MMC_SDHCI > select MISC > help > @@ -571,7 +561,7 @@ config MMC_SDHCI_ASPEED > config MMC_SDHCI_ATMEL > bool "Atmel SDHCI controller support" > depends on ARCH_AT91 > - depends on DM_MMC && ARCH_AT91 > + depends on ARCH_AT91 > depends on MMC_SDHCI > help > This enables support for the Atmel SDHCI controller, which > supports > @@ -606,7 +596,6 @@ config MMC_SDHCI_BCMSTB > > config MMC_SDHCI_CADENCE > bool "SDHCI support for the Cadence SD/SDIO/eMMC controller" > - depends on DM_MMC > depends on MMC_SDHCI > depends on OF_CONTROL > help > @@ -618,7 +607,6 @@ config MMC_SDHCI_CADENCE > > config MMC_SDHCI_CV1800B > bool "SDHCI support for the CV1800B SD/SDIO/eMMC controller" > - depends on DM_MMC > depends on MMC_SDHCI > depends on OF_CONTROL > help > @@ -633,7 +621,7 @@ config MMC_SDHCI_AM654 > bool "SDHCI Controller on TI's Am654 devices" > depends on ARCH_K3 > depends on MMC_SDHCI > - depends on DM_MMC && OF_CONTROL > + depends on OF_CONTROL > depends on REGMAP > select MMC_SDHCI_IO_ACCESSORS > help > @@ -653,7 +641,6 @@ config MMC_SDHCI_IPROC > > config MMC_SDHCI_F_SDH30 > bool "SDHCI support for Fujitsu Semiconductor/Socionext F_SDH30" > - depends on DM_MMC > depends on MMC_SDHCI > help > This selects the Secure Digital Host Controller Interface (SDHCI) > @@ -673,7 +660,6 @@ config MMC_SDHCI_KONA > > config MMC_SDHCI_MSM > bool "Qualcomm SDHCI controller" > - depends on DM_MMC > depends on MMC_SDHCI > help > Enables support for SDHCI 2.0 controller present on some Qualcomm > @@ -685,7 +671,6 @@ config MMC_SDHCI_MV > bool "SDHCI support on Marvell platform" > depends on ARCH_MVEBU > depends on MMC_SDHCI > - depends on DM_MMC > help > This selects the Secure Digital Host Controller Interface on > Marvell platform. > @@ -697,7 +682,6 @@ config MMC_SDHCI_MV > config MMC_SDHCI_NPCM > bool "SDHCI support on Nuvoton NPCM device" > depends on MMC_SDHCI > - depends on DM_MMC > help > This selects the Secure Digital Host Controller Interface (SDHCI) > on Nuvoton NPCM device. > @@ -708,7 +692,7 @@ config MMC_SDHCI_NPCM > > config MMC_SDHCI_PIC32 > bool "Microchip PIC32 on-chip SDHCI support" > - depends on DM_MMC && MACH_PIC32 > + depends on MACH_PIC32 > depends on MMC_SDHCI > help > Support for Microchip PIC32 SDHCI controller. > @@ -716,7 +700,6 @@ config MMC_SDHCI_PIC32 > config MMC_SDHCI_ROCKCHIP > bool "Arasan SDHCI controller for Rockchip support" > depends on ARCH_ROCKCHIP > - depends on DM_MMC > depends on MMC_SDHCI > help > Support for Arasan SDHCI host controller on Rockchip ARM SoCs > platform > @@ -735,7 +718,6 @@ config MMC_SDHCI_S5P > config MMC_SDHCI_SNPS > bool "Synopsys DesignWare SDHCI controller" > depends on MMC_SDHCI > - depends on DM_MMC > help > Support for DesignWare SDHCI host controller on Alibaba TH1520 > SoC. > This is a highly configurable and programmable, high performance > @@ -753,7 +735,7 @@ config MMC_SDHCI_STI > > config MMC_SDHCI_XENON > bool "SDHCI support for the Xenon SDHCI controller" > - depends on MMC_SDHCI && DM_MMC && OF_CONTROL > + depends on MMC_SDHCI && OF_CONTROL > help > Support for Xenon SDHCI host controller on Marvell Armada 3700 > 7k/8k ARM SoCs platforms > @@ -764,7 +746,6 @@ config MMC_SDHCI_XENON > > config MMC_SDHCI_TANGIER > bool "Tangier SDHCI controller support" > - depends on DM_MMC > depends on MMC_SDHCI > help > This selects support for SDHCI controller on Tanginer > @@ -800,7 +781,7 @@ config TEGRA124_MMC_DISABLE_EXT_LOOPBACK > > config MMC_SDHCI_ZYNQ > bool "Arasan SDHCI controller support" > - depends on DM_MMC && OF_CONTROL > + depends on OF_CONTROL > depends on MMC_SDHCI > help > Support for Arasan SDHCI host controller on Zynq/ZynqMP ARM SoCs > platform > @@ -842,7 +823,6 @@ config MMC_SUNXI_HAS_MODE_SWITCH > > config MMC_PITON > bool "MMC support for OpenPiton SoC" > - depends on DM_MMC > help > This selects support for the SD host controller on OpenPiton SoC. > Note that this SD controller directly exposes the contents of the > @@ -851,7 +831,7 @@ config MMC_PITON > > config GENERIC_ATMEL_MCI > bool "Atmel Multimedia Card Interface support" > - depends on DM_MMC && ARCH_AT91 > + depends on ARCH_AT91 > help > This enables support for Atmel High Speed Multimedia Card > Interface > (HSMCI), which supports the MultiMedia Card (MMC) Specification > V4.3, > @@ -860,7 +840,7 @@ config GENERIC_ATMEL_MCI > > config STM32_SDMMC2 > bool "STMicroelectronics STM32H7 SD/MMC Host Controller support" > - depends on DM_MMC && OF_CONTROL > + depends on OF_CONTROL > help > This selects support for the SD/MMC controller on STM32H7 SoCs. > If you have a board based on such a SoC and with a SD/MMC slot, > @@ -880,7 +860,6 @@ config FTSDC010_SDIO > config MMC_MTK > bool "MediaTek SD/MMC Card Interface support" > depends on ARCH_MEDIATEK || ARCH_MTMIPS > - depends on DM_MMC > depends on OF_CONTROL > help > This selects the MediaTek(R) Secure digital and Multimedia card > Interface. > @@ -911,7 +890,7 @@ config FSL_ESDHC_SUPPORT_ADMA2 > > config FSL_ESDHC_33V_IO_RELIABILITY_WORKAROUND > bool "enable eSDHC workaround for 3.3v IO reliability issue" > - depends on FSL_ESDHC && DM_MMC > + depends on FSL_ESDHC > help > When eSDHC operates at 3.3v, damage can accumulate in an internal > level shifter at a higher than expected rate. The faster the > interface > -- > 2.43.0 > >
