On Wed, Dec 18, 2024 at 4:42 PM Tim Harvey <thar...@gateworks.com> wrote: > > The mxc_get_clock function is around for compatibility with older > drivers that are not clock aware. In this case asking for the clk for > MXC_CSPI_CLK does not take into account there are multiple SPI busses on > modern IMX SoC's and it will return the clock for the first bus which > may not be used or configured. > > In the case you are not using the first bus you will not get the proper > clock. Fix this by obtaining the clock rate from the bus clock. > > This resolves an invalid SPI clock frequency configuration for SPI2 on a > board where SPI1 is not used. > > Signed-off-by: Tim Harvey <thar...@gateworks.com>
Applied to u-boot-imx/next, thanks.
