Am 13.12.24 um 17:31 schrieb Santhosh Kumar K:
From: Neha Malcom Francis <n-fran...@ti.com>
Add CONFIG_K3_INLINE_ECC so that ECC functions can be compiled into R5 SPL
only when the config has been enabled.
Signed-off-by: Neha Malcom Francis <n-fran...@ti.com>
Reviewed-by: Wadim Egorov <w.ego...@phytec.de>
---
drivers/ram/Kconfig | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/ram/Kconfig b/drivers/ram/Kconfig
index f7e357f24da7..533d0c629a64 100644
--- a/drivers/ram/Kconfig
+++ b/drivers/ram/Kconfig
@@ -116,6 +116,16 @@ config IMXRT_SDRAM
to support external memories like sdram, psram & nand.
This driver is for the sdram memory interface with the SEMC.
+config K3_INLINE_ECC
+ bool "Enable TI Inline ECC support"
+ depends on K3_DDRSS
+ help
+ Enable Inline ECC support on K3 platforms. 1/9th of the SDRAM space
+ is used for ECC storage and the rest 8/9th is available for system
+ use. Enabling ECC increases boot time as the ECC protected regions
+ need to be primed with a predefined value prior to enabling ECC
+ check.
+
source "drivers/ram/aspeed/Kconfig"
source "drivers/ram/cadence/Kconfig"
source "drivers/ram/octeon/Kconfig"
