Adjust and update existing manuals to reflect the most recent
updates.
Signed-off-by: Svyatoslav Ryhel <clamo...@gmail.com>
---
doc/board/asus/grouper.rst | 12 ++++++------
doc/board/asus/transformer_t20.rst | 6 +++---
doc/board/asus/transformer_t30.rst | 13 +++++++------
doc/board/htc/endeavoru.rst | 9 ++++-----
doc/board/lg/x3_t30.rst | 20 ++++++++++----------
doc/board/microsoft/surface-rt.rst | 4 ++--
doc/board/wexler/qc750.rst | 9 ++++-----
7 files changed, 36 insertions(+), 37 deletions(-)
diff --git a/doc/board/asus/grouper.rst b/doc/board/asus/grouper.rst
index d56a9ca3921..14469582907 100644
--- a/doc/board/asus/grouper.rst
+++ b/doc/board/asus/grouper.rst
@@ -25,7 +25,7 @@ along with cellular one.
.. code-block:: bash
- $ export CROSS_COMPILE=arm-linux-gnueabi-
+ $ export CROSS_COMPILE=arm-none-eabi-
$ make grouper_defconfig # For all grouper versions and tilapia
$ make
@@ -79,18 +79,18 @@ Flashing with the NV3P protocol
*******************************
Nv3p is a custom Nvidia protocol used to recover bricked devices. Devices can
-enter it either by using ``wheelie`` with the correct ``blob.bin`` file or by
-pre-loading vendor bootloader with the Fusée Gelée.
+enter it by pre-loading vendor bootloader with the Fusée Gelée.
With nv3p, ``repart-block.bin`` is used. It contains BCT and a bootloader in
encrypted state in form, which can just be written RAW at the start of eMMC.
.. code-block:: bash
- $ wheelie --blob blob.bin
- $ nvflash --resume --rawdevicewrite 0 1024 repart-block.bin
+ $ ./run_bootloader.sh -s T30 -t ./bct/grouper.bct -b android_bootloader.bin
+ $ ./utiils/nvflash_v1.13.87205 --resume --rawdevicewrite 0 1024
repart-block.bin
-When flashing is done, reboot the device.
+When flashing is done, reboot the device. Note that if you have cellular
version,
+use ``tilapia.bct``.
Flashing with a pre-loaded U-Boot
*********************************
diff --git a/doc/board/asus/transformer_t20.rst
b/doc/board/asus/transformer_t20.rst
index d4bc12d1619..4f4f893c3a8 100644
--- a/doc/board/asus/transformer_t20.rst
+++ b/doc/board/asus/transformer_t20.rst
@@ -25,7 +25,7 @@ defconfig. Valid fragments are ``tf101.config``,
``tf101g.config`` and
.. code-block:: bash
- $ export CROSS_COMPILE=arm-linux-gnueabi-
+ $ export CROSS_COMPILE=arm-none-eabi-
$ make transformer_t20_defconfig tf101.config # For TF101
$ make
@@ -84,8 +84,8 @@ encrypted state in form, which can just be written RAW at the
start of eMMC.
.. code-block:: bash
- $ wheelie --blob blob.bin
- $ nvflash --resume --rawdevicewrite 0 1024 repart-block.bin
+ $ wheelie -1 --bl bootloader.bin --bct tf101.bct --odm 0x300d8011 || break
+ $ nvflash --resume --rawdevicewrite 0 2048 repart-block.bin
When flashing is done, reboot the device.
diff --git a/doc/board/asus/transformer_t30.rst
b/doc/board/asus/transformer_t30.rst
index bebc4b9fad3..012a38251aa 100644
--- a/doc/board/asus/transformer_t30.rst
+++ b/doc/board/asus/transformer_t30.rst
@@ -22,6 +22,7 @@ Build U-Boot
U-Boot features ability to detect transformer device model on which it is
loaded. The list of supported devices include:
+
- ASUS Transformer Prime TF201
- ASUS Transformer Pad (3G/LTE) TF300T/TG/TL
- ASUS Transformer Infinity TF700T
@@ -30,7 +31,7 @@ loaded. The list of supported devices include:
.. code-block:: bash
- $ export CROSS_COMPILE=arm-linux-gnueabi-
+ $ export CROSS_COMPILE=arm-none-eabi-
$ make transformer_t30_defconfig
$ make
@@ -84,18 +85,18 @@ Flashing with the NV3P protocol
*******************************
Nv3p is a custom Nvidia protocol used to recover bricked devices. Devices can
-enter it either by using ``wheelie`` with the correct ``blob.bin`` file or by
-pre-loading vendor bootloader with the Fusée Gelée.
+enter it by pre-loading vendor bootloader with the Fusée Gelée.
With nv3p, ``repart-block.bin`` is used. It contains BCT and a bootloader in
encrypted state in form, which can just be written RAW at the start of eMMC.
.. code-block:: bash
- $ wheelie --blob blob.bin
- $ nvflash --resume --rawdevicewrite 0 1024 repart-block.bin
+ $ ./run_bootloader.sh -s T30 -t ./bct/tf201.bct -b android_bootloader.bin
+ $ ./utiils/nvflash_v1.13.87205 --resume --rawdevicewrite 0 1024
repart-block.bin
-When flashing is done, reboot the device.
+When flashing is done, reboot the device. Note that you should adjust bct file
+name according to your device.
Flashing with a pre-loaded U-Boot
*********************************
diff --git a/doc/board/htc/endeavoru.rst b/doc/board/htc/endeavoru.rst
index e0edefe28ae..53df2d09a6f 100644
--- a/doc/board/htc/endeavoru.rst
+++ b/doc/board/htc/endeavoru.rst
@@ -21,7 +21,7 @@ Build U-Boot
.. code-block:: bash
- $ export CROSS_COMPILE=arm-linux-gnueabi-
+ $ export CROSS_COMPILE=arm-none-eabi-
$ make endeavoru_defconfig
$ make
@@ -72,16 +72,15 @@ Flashing with the NV3P protocol
*******************************
Nv3p is a custom Nvidia protocol used to recover bricked devices. Devices can
-enter it either by using ``wheelie`` with the correct ``blob.bin`` file or by
-pre-loading vendor bootloader with the Fusée Gelée.
+enter it by pre-loading vendor bootloader with the Fusée Gelée.
With nv3p, ``repart-block.bin`` is used. It contains BCT and a bootloader in
encrypted state in form, which can just be written RAW at the start of eMMC.
.. code-block:: bash
- $ wheelie --blob blob.bin
- $ nvflash --resume --rawdevicewrite 0 1024 repart-block.bin
+ $ ./run_bootloader.sh -s T30 -t ./bct/endeavoru.bct -b
android_bootloader.bin
+ $ ./utiils/nvflash_v1.13.87205 --resume --rawdevicewrite 0 1024
repart-block.bin
When flashing is done, reboot the device.
diff --git a/doc/board/lg/x3_t30.rst b/doc/board/lg/x3_t30.rst
index 618b00d34e3..9ff75034b72 100644
--- a/doc/board/lg/x3_t30.rst
+++ b/doc/board/lg/x3_t30.rst
@@ -24,7 +24,7 @@ board defconfig. Valid fragments are ``p880.config`` and
``p895.config``.
.. code-block:: bash
- $ export CROSS_COMPILE=arm-linux-gnueabi-
+ $ export CROSS_COMPILE=arm-none-eabi-
$ make x3_t30_defconfig p895.config # For LG Optimus Vu
$ make
@@ -75,18 +75,18 @@ Flashing with the NV3P protocol
*******************************
Nv3p is a custom Nvidia protocol used to recover bricked devices. Devices can
-enter it either by using ``wheelie`` with the correct ``blob.bin`` file or by
-pre-loading vendor bootloader with the Fusée Gelée.
+enter it by pre-loading vendor bootloader with the Fusée Gelée.
With nv3p, ``repart-block.bin`` is used. It contains BCT and a bootloader in
encrypted state in form, which can just be written RAW at the start of eMMC.
.. code-block:: bash
- $ wheelie --blob blob.bin
- $ nvflash --resume --rawdevicewrite 0 1024 repart-block.bin
+ $ ./run_bootloader.sh -s T30 -t ./bct/p895.bct -b android_bootloader.bin
+ $ ./utiils/nvflash_v1.13.87205 --resume --rawdevicewrite 0 1024
repart-block.bin
-When flashing is done, reboot the device.
+When flashing is done, reboot the device. Note that if you have Optimus 4x HD,
+use ``p880.bct``.
Flashing with a pre-loaded U-Boot
*********************************
@@ -122,7 +122,7 @@ the user to use/partition it in any way the user desires.
Self Upgrading
--------------
-Place your ``u-boot-dtb-tegra.bin`` on the first partition of the eMMC (using
-ability of u-boot to mount it). Enter bootmenu, choose update bootloader option
-with Power button and U-Boot should update itself. Once the process is
-completed, U-Boot will ask to press any button to reboot.
+Place your ``u-boot-dtb-tegra.bin`` on the first partition of the eMMC or
MicroSD
+card if it is supported (using ability of u-boot to mount it). Enter bootmenu,
+choose update bootloader option with Power button and U-Boot should update
itself.
+Once the process is completed, U-Boot will ask to press any button to reboot.
diff --git a/doc/board/microsoft/surface-rt.rst
b/doc/board/microsoft/surface-rt.rst
index b5645e79340..2b29cce40a9 100644
--- a/doc/board/microsoft/surface-rt.rst
+++ b/doc/board/microsoft/surface-rt.rst
@@ -14,7 +14,7 @@ Build U-Boot
.. code-block:: bash
- $ export CROSS_COMPILE=arm-linux-gnueabi-
+ $ export CROSS_COMPILE=arm-none-eabi-
$ make surface-rt_defconfig
$ make
@@ -38,4 +38,4 @@ directory with
To boot Linux, U-Boot will look for an ``extlinux.conf`` on MicroSD and then on
eMMC. Additionally, if the Volume Down button is pressed while loading, the
device will enter bootmenu. Bootmenu contains entries to mount MicroSD and eMMC
-as mass storage, fastboot, reboot, reboot RCM, poweroffand enter U-Boot
console.
+as mass storage, fastboot, reboot, reboot RCM, poweroff and enter U-Boot
console.
diff --git a/doc/board/wexler/qc750.rst b/doc/board/wexler/qc750.rst
index b61e40176b0..169629c7e47 100644
--- a/doc/board/wexler/qc750.rst
+++ b/doc/board/wexler/qc750.rst
@@ -21,7 +21,7 @@ Build U-Boot
.. code-block:: bash
- $ export CROSS_COMPILE=arm-linux-gnueabi-
+ $ export CROSS_COMPILE=arm-none-eabi-
$ make qc750_defconfig
$ make
@@ -71,16 +71,15 @@ pre-loading just built U-Boot into RAM.
Flashing with the NV3P protocol
*******************************
-Nv3p is a custom Nvidia protocol used to recover bricked devices. Devices can
-enter it either by using ``wheelie`` with the correct ``blob.bin`` file or by
-pre-loading vendor bootloader with the Fusée Gelée.
+Nv3p is a custom Nvidia protocol used to recover bricked devices. Tegrarcm is
+used to handle such state.
With nv3p, ``repart-block.bin`` is used. It contains BCT and a bootloader in
encrypted state in form, which can just be written RAW at the start of eMMC.
.. code-block:: bash
- $ wheelie --bct qc750.bct --bl bootloader.bin
+ $ tegrarcm --bct qc750.bct --bootloader android_bootloader.bin --loadaddr
0x80108000
$ nvflash --resume --rawdevicewrite 0 1024 repart-block.bin
When flashing is done, reboot the device.
--
2.43.0
