Signed-off-by: Aneesh V <ane...@ti.com>
---
V2:
* Added a revision string in addition to the revision number
Helps in printing out the OMAP revision at bootup
---
arch/arm/cpu/armv7/omap4/board.c | 58 +++++++++++++++++++++++++++++++
arch/arm/include/asm/arch-omap4/omap4.h | 17 ++++++---
arch/arm/include/asm/armv7.h | 6 +++-
3 files changed, 74 insertions(+), 7 deletions(-)
diff --git a/arch/arm/cpu/armv7/omap4/board.c b/arch/arm/cpu/armv7/omap4/board.c
index fcd29a7..8ab7306 100644
--- a/arch/arm/cpu/armv7/omap4/board.c
+++ b/arch/arm/cpu/armv7/omap4/board.c
@@ -28,6 +28,7 @@
* MA 02111-1307 USA
*/
#include <common.h>
+#include <asm/armv7.h>
#include <asm/arch/cpu.h>
#include <asm/arch/sys_proto.h>
#include <asm/sizes.h>
@@ -127,3 +128,60 @@ int arch_cpu_init(void)
set_muxconf_regs();
return 0;
}
+
+static u32 cortex_a9_rev(void)
+{
+
+ unsigned int rev;
+
+ /* Read Main ID Register (MIDR) */
+ asm ("mrc p15, 0, %0, c0, c0, 0" : "=r" (rev));
+
+ return rev;
+}
+
+u32 omap4_revision(void)
+{
+ if (readl(CONTROL_ID_CODE) == OMAP4_CONTROL_ID_CODE_ES2_1)
+ return OMAP4430_ES2_1;
+ else if (readl(CONTROL_ID_CODE) == OMAP4_CONTROL_ID_CODE_ES2_2)
+ return OMAP4430_ES2_2;
+ /*
+ * For some of the ES2/ES1 boards ID_CODE is not reliable:
+ * Also, ES1 and ES2 have different ARM revisions
+ * So use ARM revision for identification
+ */
+ unsigned int rev = cortex_a9_rev();
+
+ switch (rev) {
+ case MIDR_CORTEX_A9_R0P1:
+ return OMAP4430_ES1_0;
+ case MIDR_CORTEX_A9_R1P2:
+ return OMAP4430_ES2_0;
+ default:
+ return OMAP4430_SILICON_ID_INVALID;
+ }
+}
+
+const char *omap4_rev_string(void)
+{
+ const char *omap4_rev = NULL;
+ switch (omap4_revision()) {
+ case OMAP4430_ES1_0:
+ omap4_rev = "OMAP4430 ES1.0";
+ break;
+ case OMAP4430_ES2_0:
+ omap4_rev = "OMAP4430 ES2.0";
+ break;
+ case OMAP4430_ES2_1:
+ omap4_rev = "OMAP4430 ES2.1";
+ break;
+ case OMAP4430_ES2_2:
+ omap4_rev = "OMAP4430 ES2.2";
+ break;
+ default:
+ omap4_rev = "OMAP4 - Unknown Rev";
+ break;
+ }
+ return omap4_rev;
+}
diff --git a/arch/arm/include/asm/arch-omap4/omap4.h
b/arch/arm/include/asm/arch-omap4/omap4.h
index a30bb33..1f88732 100644
--- a/arch/arm/include/asm/arch-omap4/omap4.h
+++ b/arch/arm/include/asm/arch-omap4/omap4.h
@@ -51,6 +51,11 @@
#define CONTROL_PADCONF_CORE (OMAP44XX_L4_CORE_BASE + 0x100000)
#define CONTROL_PADCONF_WKUP (OMAP44XX_L4_CORE_BASE + 0x31E000)
+/* CONTROL_ID_CODE */
+#define CONTROL_ID_CODE (CTRL_BASE + 0x204)
+
+#define OMAP4_CONTROL_ID_CODE_ES2_1 0x3B95C02F
+#define OMAP4_CONTROL_ID_CODE_ES2_2 0x4B95C02F
/* UART */
#define UART1_BASE (OMAP44XX_L4_PER_BASE + 0x6a000)
#define UART2_BASE (OMAP44XX_L4_PER_BASE + 0x6c000)
@@ -121,11 +126,11 @@ struct s32ktimer {
/* Temporary SRAM stack used while low level init is done */
#define LOW_LEVEL_SRAM_STACK NON_SECURE_SRAM_END
-/*
- * OMAP4 real hardware:
- * TODO: Change this to the IDCODE in the hw regsiter
- */
-#define CPU_OMAP4430_ES10 1
-#define CPU_OMAP4430_ES20 2
+/* Silicon revisions */
+#define OMAP4430_SILICON_ID_INVALID 0
+#define OMAP4430_ES1_0 1
+#define OMAP4430_ES2_0 2
+#define OMAP4430_ES2_1 3
+#define OMAP4430_ES2_2 4
#endif
diff --git a/arch/arm/include/asm/armv7.h b/arch/arm/include/asm/armv7.h
index 50cc167..772435b 100644
--- a/arch/arm/include/asm/armv7.h
+++ b/arch/arm/include/asm/armv7.h
@@ -26,6 +26,10 @@
#define ARMV7_H
#include <linux/types.h>
+/* Cortex-A9 revisions */
+#define MIDR_CORTEX_A9_R0P1 0x410FC091
+#define MIDR_CORTEX_A9_R1P2 0x411FC092
+
/* CCSIDR */
#define CCSIDR_LINE_SIZE_OFFSET 0
#define CCSIDR_LINE_SIZE_MASK 0x7
@@ -65,4 +69,4 @@ void v7_outer_cache_inval_all(void);
void v7_outer_cache_flush_range(u32 start, u32 end);
void v7_outer_cache_inval_range(u32 start, u32 end);
-#endif
+#endif /* ARMV7_H */
--
1.7.0.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
