On Sun, 1 Dec 2024 at 20:58, Simon Glass <s...@chromium.org> wrote: > > The EFI_LOADER_BOUNCE_BUFFER feature was added many years ago. It is > still needed and 24 boards (lx2160ardb_tfa_stmm, > lx2162aqds_tfa_SECURE_BOOT and the like) use it. > > This feature uses EFI page allocation to create a 64MB buffer 'in space' > without any knowledge of where boards intend to load their images. This > may result in image corruption or other problems. > > For example, if the feature is enabled on qemu_arm64 it puts the EFI > bounce buffer at 1045MB, with the kernel at 1028MB and the ramdisk at > 1088MB. The kernel is probably smaller than 27MB but the buffer does > overlap the ramdisk. > > The solution is probably to use BOUNCE_BUFFER instead, with the EFI > version being dropped. For now, show the address of the EFI bounce > buffer so people have a better chance to debug any problem. > > Signed-off-by: Simon Glass <s...@chromium.org> > --- > In response to questions on how to show this problem: > > First, add CONFIG_EFI_LOADER_BOUNCE_BUFFER=y to > configs/qemu_arm64_defconfig and build > > Then, to run: > qemu-system-aarch64 -machine virt -nographic -cpu cortex-a57 \ > -bios u-boot.bin > > U-Boot 2024.10-00809-gae29e5f76e4a-dirty (Oct 11 2024 - 11:48:46 -0600) > > DRAM: 128 MiB > Core: 51 devices, 14 uclasses, devicetree: board > Flash: 64 MiB > Loading Environment from Flash... *** Warning - bad CRC, using default > environment > > In: serial,usbkbd > Out: serial,vidconsole > Err: serial,vidconsole > No USB controllers found > Net: eth0: virtio-net#32 > > starting USB... > No USB controllers found > Hit any key to stop autoboot: 0 > => bootefi hello > Enabling coop memory > No EFI system partition > No EFI system partition > Failed to persist EFI variables > Missing TPMv2 device for EFI_TCG_PROTOCOL > Missing RNG device for EFI_RNG_PROTOCOL > Warning: EFI bounce buffer 000000004157f000-000000004557f000 > Not loaded from disk > Booting /MemoryMapped(0x0,0x47763730,0x31b0) > EFI: Call: efi_load_image(false, efi_root, file_path, source_buffer, > source_size, &handle) > EFI: 0 returned by efi_load_image(false, efi_root, file_path, source_buffer, > source_size, &handle) > Hello, world! > Running on UEFI 2.10 > Firmware vendor: Das U-Boot > Firmware revision: 20241000 > Have device tree > Load options: <none> > File path: <none> > Boot device: /MemoryMapped(0x0,0x47763730,0x31b0) > => print kernel_addr_r > kernel_addr_r=0x40400000 > => print ramdisk_addr_r > ramdisk_addr_r=0x44000000 > => > > The EFI bounce buffer overlaps with the ramdisk.
Why can't we "allocate" sane values for the env variables in question, similar to what is being done for the apple and qcom boards -- you can refer to arch/arm/mach-apple/board.c:board_late_init(). We won't be facing these issues then. Eventually, there can be a common, platform agnostic function to initialise these values. So, just as a PoC, I added this code to the qemu-arm.c, and no longer observe any overlaps. diff --git a/board/emulation/qemu-arm/qemu-arm.c b/board/emulation/qemu-arm/qemu-arm.c index 6095cb02b23..bad787f7a65 100644 --- a/board/emulation/qemu-arm/qemu-arm.c +++ b/board/emulation/qemu-arm/qemu-arm.c @@ -109,6 +109,9 @@ int board_init(void) int board_late_init(void) { + + u32 status = 0; + /* * Make sure virtio bus is enumerated so that peripherals * on the virtio bus can be discovered by their drivers @@ -119,6 +122,14 @@ int board_late_init(void) if (CONFIG_IS_ENABLED(USB_KEYBOARD)) usb_init(); + status |= env_set_hex("loadaddr", lmb_alloc(SZ_2M, SZ_2M)); + status |= env_set_hex("fdt_addr_r", lmb_alloc(SZ_2M, SZ_2M)); + status |= env_set_hex("kernel_addr_r", lmb_alloc(SZ_2M, SZ_2M)); + status |= env_set_hex("ramdisk_addr_r", lmb_alloc(SZ_8M, SZ_2M)); + + if (status) + log_warning("late_init: Failed to set run time variables\n"); + return 0; } U-Boot 2025.01-rc3-00042-gacab6e78aca7-dirty (Dec 03 2024 - 17:17:42 +0530) DRAM: 512 MiB EFI bounce buffer 000000005957f000-000000005d57f000 Core: 51 devices, 14 uclasses, devicetree: board Flash: 64 MiB Loading Environment from Flash... *** Warning - bad CRC, using default environment In: serial,usbkbd Out: serial,vidconsole Err: serial,vidconsole No USB controllers found Net: eth0: virtio-net#31 starting USB... No USB controllers found Hit any key to stop autoboot: 0 => bdinfo ... lmb_dump_all: memory.count = 0x1 memory[0] [0x40000000-0x5fffffff], 0x20000000 bytes, flags: none reserved.count = 0x3 reserved[0] [0x58600000-0x593fffff], 0xe00000 bytes, flags: none reserved[1] [0x5957c000-0x5d57efff], 0x4003000 bytes, flags: no-notify, no-overwrite reserved[2] [0x5d57fde0-0x5fffffff], 0x2a80220 bytes, flags: no-overwrite ... => printenv kernel_addr_r kernel_addr_r=58e00000 => printenv ramdisk_addr_r ramdisk_addr_r=58600000 => printenv fdt_addr_r fdt_addr_r=59000000 => printenv loadaddr loadaddr=59200000 -sughosh > > Changes in v5: > - Drop the word 'warning' > > Changes in v4: > - Reword the commit message since this feature is needed > > lib/efi_loader/efi_bootbin.c | 9 +++++++++ > 1 file changed, 9 insertions(+) > > diff --git a/lib/efi_loader/efi_bootbin.c b/lib/efi_loader/efi_bootbin.c > index 7e7a6bf31aa..9a880251b47 100644 > --- a/lib/efi_loader/efi_bootbin.c > +++ b/lib/efi_loader/efi_bootbin.c > @@ -208,6 +208,15 @@ efi_status_t efi_binary_run(void *image, size_t size, > void *fdt) > return -1; > } > > +#ifdef CONFIG_EFI_LOADER_BOUNCE_BUFFER > + /* > + * Add a warning about this buffer, since it may conflict with other > + * things > + */ > + log_debug("EFI bounce buffer %p-%p\n", efi_bounce_buffer, > + efi_bounce_buffer + EFI_LOADER_BOUNCE_BUFFER_SIZE); > +#endif > + > ret = efi_install_fdt(fdt); > if (ret != EFI_SUCCESS) > return ret; > -- > 2.43.0 >