Banana Pi F3 board is a industrial grade RISC-V development board, it design with SpacemiT K1 8 core RISC-V chip, CPU integrates 2.0 TOPs AI computing power. 4G DDR and 16G eMMC onboard. 2x GbE Ethernet port, 4x USB 3.0 and PCIe for M.2 interface, support HDMI and Dual MIPI-CSI Camera.
This patch introduces fundamental support for the Banana Pi F3 board, encompassing UART, CPU, and PLIC support. This ensures that U-Boot can operate in serial console mode. Changes in v3: - Add memory node for dts - Add base commit - Add ft_board_setup function for kernel memory init - Change license to GPL-2.0-or-later - Clear redifinition warning while building in UART_IIR_ID - Change underscore to dash in bananapi*f3 - Update maintainer - Use default prompt - link to v2 https://lore.kernel.org/u-boot/20240718043329.1500-1-seashell11234...@gmail.com/ Signed-off-by: Huan Zhou <pericycle...@gmail.com> Signed-off-by: Kongyang Liu <seashell11234...@gmail.com> --- Kongyang Liu (2): riscv: spacemit: bananapi_f3: initial support added doc: spacemit: bananapi_f3: document Banana Pi F3 board arch/riscv/Kconfig | 5 + arch/riscv/cpu/k1/Kconfig | 18 ++ arch/riscv/cpu/k1/Makefile | 6 + arch/riscv/cpu/k1/cpu.c | 9 + arch/riscv/cpu/k1/dram.c | 54 ++++ arch/riscv/dts/Makefile | 1 + arch/riscv/dts/k1-bananapi-f3.dts | 25 ++ arch/riscv/dts/k1.dtsi | 459 +++++++++++++++++++++++++++++++++ board/spacemit/bananapi-f3/Kconfig | 25 ++ board/spacemit/bananapi-f3/MAINTAINERS | 7 + board/spacemit/bananapi-f3/Makefile | 5 + board/spacemit/bananapi-f3/board.c | 9 + configs/bananapi-f3_defconfig | 20 ++ doc/board/index.rst | 1 + doc/board/spacemit/bananapi-f3.rst | 78 ++++++ doc/board/spacemit/index.rst | 8 + include/configs/bananapi-f3.h | 13 + 17 files changed, 743 insertions(+) --- base-commit: 40c45a57974bdb09fffa31dde65ddf69e5de53eb change-id: 20241112-pickup-bpif3-245ab208b9a4 Best regards, -- Huan Zhou <pericycle...@gmail.com>
