On 30/10/24 22:18, Wadim Egorov wrote:
Include SoM dt-overlays that handle variants of our SoMs into u-boot's FIT image.Signed-off-by: Wadim Egorov <w.ego...@phytec.de> --- arch/arm/dts/k3-am642-phycore-som-binman.dtsi | 54 ++++++++++++++++++- 1 file changed, 53 insertions(+), 1 deletion(-) diff --git a/arch/arm/dts/k3-am642-phycore-som-binman.dtsi b/arch/arm/dts/k3-am642-phycore-som-binman.dtsi index dd0967079b6..88d6c40e95c 100644 --- a/arch/arm/dts/k3-am642-phycore-som-binman.dtsi +++ b/arch/arm/dts/k3-am642-phycore-som-binman.dtsi @@ -344,6 +344,54 @@ description = "U-Boot for AM64 board"; };+ som-no-rtc {+ description = "k3-am6xx-phycore-disable-rtc"; + type = "flat_dt"; + compression = "none"; + load = <0x8F000000>; + arch = "arm"; + + blob-ext { + filename = "dts/upstream/src/arm64/ti/k3-am6xx-phycore-disable-rtc.dtbo"; + }; + }; + + som-no-spi { + description = "k3-am6xx-phycore-disable-spi-nor"; + type = "flat_dt"; + compression = "none"; + load = <0x8F001000>; + arch = "arm"; + + blob-ext { + filename = "dts/upstream/src/arm64/ti/k3-am6xx-phycore-disable-spi-nor.dtbo"; + }; + }; + + som-no-eth { + description = "k3-am6xx-phycore-disable-eth-phy"; + type = "flat_dt"; + compression = "none"; + load = <0x8F002000>; + arch = "arm"; + + blob-ext { + filename = "dts/upstream/src/arm64/ti/k3-am6xx-phycore-disable-eth-phy.dtbo"; + }; + }; + + som-qspi { + description = "k3-am6xx-phycore-qspi-nor"; + type = "flat_dt"; + compression = "none"; + load = <0x8F003000>; + arch = "arm"; + + blob-ext { + filename = "dts/upstream/src/arm64/ti/k3-am6xx-phycore-qspi-nor.dtbo"; + }; + }; + fdt-0 { description = "k3-am642-phyboard-electra-rdk"; type = "flat_dt"; @@ -368,7 +416,11 @@ conf-0 { description = "k3-am642-phyboard-electra-rdk"; firmware = "uboot"; - loadables = "uboot"; + loadables = "uboot", + "som-no-rtc", + "som-no-spi", + "som-no-eth", + "som-qspi"; fdt = "fdt-0"; }; };
Reviewed-by: Neha Malcom Francis <n-fran...@ti.com> -- Thanking You Neha Malcom Francis
