Hi Stefano, Ping?
Regards, Fabio Estevam On 4/26/2011 6:04 PM, Fabio Estevam wrote: > No need to use '#define SYMBOL 1' to make it active. > > Signed-off-by: Fabio Estevam <fabio.este...@freescale.com> > --- > include/configs/mx31pdk.h | 32 ++++++++++++++++---------------- > 1 files changed, 16 insertions(+), 16 deletions(-) > > diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h > index d4c6d16..50e751a 100644 > --- a/include/configs/mx31pdk.h > +++ b/include/configs/mx31pdk.h > @@ -33,17 +33,17 @@ > #include <asm/arch/imx-regs.h> > > /* High Level Configuration Options */ > -#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core > */ > -#define CONFIG_MX31 1 /* in a mx31 */ > +#define CONFIG_ARM1136 /* This is an arm1136 CPU core > */ > +#define CONFIG_MX31 /* in a mx31 */ > #define CONFIG_MX31_HCLK_FREQ 26000000 > #define CONFIG_MX31_CLK32 32768 > > #define CONFIG_DISPLAY_CPUINFO > #define CONFIG_DISPLAY_BOARDINFO > > -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ > -#define CONFIG_SETUP_MEMORY_TAGS 1 > -#define CONFIG_INITRD_TAG 1 > +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ > +#define CONFIG_SETUP_MEMORY_TAGS > +#define CONFIG_INITRD_TAG > > #if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) > #define CONFIG_SKIP_LOWLEVEL_INIT > @@ -59,11 +59,11 @@ > * Hardware drivers > */ > > -#define CONFIG_MXC_UART 1 > -#define CONFIG_SYS_MX31_UART1 1 > +#define CONFIG_MXC_UART > +#define CONFIG_SYS_MX31_UART1 > > -#define CONFIG_HARD_SPI 1 > -#define CONFIG_MXC_SPI 1 > +#define CONFIG_HARD_SPI > +#define CONFIG_MXC_SPI > #define CONFIG_DEFAULT_SPI_BUS 1 > #define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_0 | SPI_CS_HIGH) > > @@ -72,7 +72,7 @@ > #define CONFIG_FSL_PMIC_CS 2 > #define CONFIG_FSL_PMIC_CLK 1000000 > #define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH) > -#define CONFIG_RTC_MC13783 1 > +#define CONFIG_RTC_MC13783 > > /* allow to overwrite serial and ethaddr */ > #define CONFIG_ENV_OVERWRITE > @@ -112,9 +112,9 @@ > "nand write 0x81000000 0x0 0x40000\0" > > #define CONFIG_NET_MULTI > -#define CONFIG_SMC911X 1 > +#define CONFIG_SMC911X > #define CONFIG_SMC911X_BASE 0xB6000000 > -#define CONFIG_SMC911X_32_BIT 1 > +#define CONFIG_SMC911X_32_BIT > > /* > * Miscellaneous configurable options > @@ -139,7 +139,7 @@ > > #define CONFIG_SYS_HZ 1000 > > -#define CONFIG_CMDLINE_EDITING 1 > +#define CONFIG_CMDLINE_EDITING > > /*----------------------------------------------------------------------- > * Stack sizes > @@ -154,7 +154,7 @@ > #define CONFIG_NR_DRAM_BANKS 1 > #define PHYS_SDRAM_1 CSD0_BASE > #define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) > -#define CONFIG_BOARD_EARLY_INIT_F 1 > +#define CONFIG_BOARD_EARLY_INIT_F > > #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 > #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR > @@ -166,9 +166,9 @@ > * FLASH and environment organization > */ > /* No NOR flash present */ > -#define CONFIG_SYS_NO_FLASH 1 > +#define CONFIG_SYS_NO_FLASH > > -#define CONFIG_ENV_IS_IN_NAND 1 > +#define CONFIG_ENV_IS_IN_NAND > #define CONFIG_ENV_OFFSET 0x40000 > #define CONFIG_ENV_OFFSET_REDUND 0x60000 > #define CONFIG_ENV_SIZE (128 * 1024) _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
