Hi Naoki,
On 10/31/24 4:22 AM, FUKAUMI Naoki wrote:
enable RK806 SPI PMIC driver and related cmd/configs for Radxa ROCK 5A.
Signed-off-by: FUKAUMI Naoki <na...@radxa.com>
---
configs/rock5a-rk3588s_defconfig | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/configs/rock5a-rk3588s_defconfig b/configs/rock5a-rk3588s_defconfig
index 9618d590009..d2770198ef2 100644
--- a/configs/rock5a-rk3588s_defconfig
+++ b/configs/rock5a-rk3588s_defconfig
@@ -28,6 +28,7 @@ CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
@@ -55,11 +56,16 @@ CONFIG_PHY_ROCKCHIP_INNO_USB2=y
CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
CONFIG_PHY_ROCKCHIP_USBDP=y
CONFIG_SPL_PINCTRL=y
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_SPL_PMIC_RK8XX=y
This won't be useful as neither the SPI controller, SPI pinmux nor PMIC
nodes are marked as to keep for SPL in the DT as far as I could tell.
Same remark for patch 3 in this series.
Cheers,
Quentin
