On 10/18/24 11:57 PM, Lothar Rubusch wrote:
On Mon, Oct 14, 2024 at 8:42 PM Marek Vasut <ma...@denx.de> wrote:

On 10/13/24 4:32 PM, Lothar Rubusch wrote:

[...]

diff --git a/arch/arm/dts/socfpga_arria10_enclustra_mercury_aa1.dts 
b/arch/arm/dts/socfpga_arria10_enclustra_mercury_aa1.dts
new file mode 100644
index 0000000000..1b29ab9358
--- /dev/null
+++ b/arch/arm/dts/socfpga_arria10_enclustra_mercury_aa1.dts
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+/* The arria10 family */
+#include "socfpga/socfpga_arria10_mercury_aa1.dtsi"
+
+/ {
+     aliases {
+             ethernet0 = &gmac0;
+             serial0 = &uart0;
+             serial1 = &uart1;
+             i2c0 = &i2c1;
+             i2c1 = &i2c0;
+             spi0 = &qspi;
+     };
+};
+
+&qspi {
+     bootph-all;
+     status = "okay";
+     flash0: s25fl512s@0 {
+             bootph-all;
+
+             cdns,page-size = <256>;
+             cdns,block-size = <16>;
+
+             cdns,tshsl-ns = <200>;
+             cdns,tsd2d-ns = <255>;
+             cdns,tchsh-ns = <20>;
+             cdns,tslch-ns = <20>;
+     };
+};
+
+/* Carrier board support */
+#if IS_ENABLED(CONFIG_ENCLUSTRA_PE1)
+# include "socfpga/socfpga_enclustra_mercury_pe1.dtsi"
+#elif IS_ENABLED(CONFIG_ENCLUSTRA_PE3)
+# include "socfpga/socfpga_enclustra_mercury_pe3.dtsi"
+#elif IS_ENABLED(CONFIG_ENCLUSTRA_ST1)
+# include "socfpga/socfpga_enclustra_mercury_st1.dtsi"
+#endif

Can this be moved to socfpga_arria10_mercury_aa1-u-boot.dtsi instead ,
as this is likely not going to be part of the upstream
socfpga_arria10_mercury_aa1.dts ?

I may try to put more of this content into a ...-u-boot.dtsi and then
try to take more advantage out of the u-boot DT generation process. I
will have a look on what I could improve to match the u-boot DT
generation approach still a bit better.

I was orienting myself a bit by the other arria10 devices there. But I
think .dts in dts/upstream will definitely not work with the current
approach, and as a .dts file due to this bitstream loading and muxing
situation needed to be done in SPL and u-boot only. I'll see if I can
figure out.

Thank you !

Reply via email to