Hi Jonas,
On Fri, 18 Oct 2024 at 10:34, Jonas Karlman <jo...@kwiboo.se> wrote:
>
> Implement checkboard() to print current SoC model, e.g. one of:
>
> SoC: RK3566 v1
> SoC: RK3566 v2
> SoC: RK3566T v2
> SoC: RK3568 v2
> SoC: RK3568B2 v2
> SoC: RK3568J v2
>
> when U-Boot proper is started.
>
> Information about what SoC model, variant and version is read from OTP.
>
> Signed-off-by: Jonas Karlman <jo...@kwiboo.se>
> ---
> arch/arm/dts/rk356x-u-boot.dtsi | 4 ++
> arch/arm/mach-rockchip/rk3568/rk3568.c | 65 ++++++++++++++++++++++++++
> configs/generic-rk3568_defconfig | 2 +-
> 3 files changed, 70 insertions(+), 1 deletion(-)
>
Instead of this, can you use add a CPU driver? Then it should happen
automatically - see print_cpuinfo().
> diff --git a/arch/arm/dts/rk356x-u-boot.dtsi b/arch/arm/dts/rk356x-u-boot.dtsi
> index 0a0943b462a9..24a976cf7e21 100644
> --- a/arch/arm/dts/rk356x-u-boot.dtsi
> +++ b/arch/arm/dts/rk356x-u-boot.dtsi
> @@ -87,6 +87,10 @@
> bootph-all;
> };
>
> +&otp {
> + bootph-some-ram;
> +};
> +
> &pcfg_pull_none {
> bootph-all;
> };
> diff --git a/arch/arm/mach-rockchip/rk3568/rk3568.c
> b/arch/arm/mach-rockchip/rk3568/rk3568.c
> index 768a37393290..fc4c140ab970 100644
> --- a/arch/arm/mach-rockchip/rk3568/rk3568.c
> +++ b/arch/arm/mach-rockchip/rk3568/rk3568.c
> @@ -4,6 +4,7 @@
> */
>
> #include <dm.h>
> +#include <misc.h>
> #include <asm/armv8/mmu.h>
> #include <asm/arch-rockchip/bootrom.h>
> #include <asm/arch-rockchip/grf_rk3568.h>
> @@ -133,3 +134,67 @@ int arch_cpu_init(void)
> #endif
> return 0;
> }
> +
> +#define RK3568_OTP_CPU_CODE_OFFSET 0x02
> +#define RK3568_OTP_SPECIFICATION_OFFSET 0x07
> +#define RK3568_OTP_CPU_VERSION_OFFSET 0x08
> +#define RK3568_OTP_PERFORMANCE_OFFSET 0x22
> +
> +int checkboard(void)
> +{
> + u8 cpu_code[2], specification, package, cpu_version, performance;
> + struct udevice *dev;
> + char suffix[3];
> + int ret;
> +
> + ret = uclass_get_device_by_driver(UCLASS_MISC,
> + DM_DRIVER_GET(rockchip_otp), &dev);
> + if (ret) {
> + debug("%s: could not find otp device, ret=%d\n", __func__,
> ret);
> + return 0;
> + }
> +
> + /* cpu-code: SoC model, 0x35 0x66 or 0x35 0x68 */
> + ret = misc_read(dev, RK3568_OTP_CPU_CODE_OFFSET, cpu_code, 2);
> + if (ret < 0) {
> + debug("%s: could not read cpu-code, ret=%d\n", __func__, ret);
> + return 0;
> + }
> +
> + /* specification: SoC variant, 0x2 for RK3568B2 and 0xA for RK3568J */
> + ret = misc_read(dev, RK3568_OTP_SPECIFICATION_OFFSET, &specification,
> 1);
> + if (ret < 0) {
> + debug("%s: could not read specification, ret=%d\n", __func__,
> ret);
> + return 0;
> + }
> + /* package: likely SoC variant revision, 0x2 for RK3568B2 */
> + package = specification >> 5;
> + specification &= 0x1f;
> +
> + /* cpu-version: chip version, e.g. second letter of lot number */
> + ret = misc_read(dev, RK3568_OTP_CPU_VERSION_OFFSET, &cpu_version, 1);
> + if (ret < 0) {
> + debug("%s: could not read cpu-version, ret=%d\n", __func__,
> ret);
> + return 0;
> + }
> + cpu_version >>= 3;
> + cpu_version &= 0x7;
> +
> + /* performance: used to identify RK3566T SoC variant */
> + ret = misc_read(dev, RK3568_OTP_PERFORMANCE_OFFSET, &performance, 1);
> + if (ret < 0) {
> + debug("%s: could not read performance, ret=%d\n", __func__,
> ret);
> + return 0;
> + }
> + if (performance & 0x0f)
> + specification = 0x14; /* T-variant */
> +
> + suffix[0] = specification > 1 ? '@' + specification : 0;
> + suffix[1] = package > 1 ? '0' + package : 0;
> + suffix[2] = 0;
> +
> + printf("SoC: RK%02x%02x%s v%u\n",
> + cpu_code[0], cpu_code[1], suffix, cpu_version);
> +
> + return 0;
> +}
> diff --git a/configs/generic-rk3568_defconfig
> b/configs/generic-rk3568_defconfig
> index 1d06f3411fe0..f79f0e84400b 100644
> --- a/configs/generic-rk3568_defconfig
> +++ b/configs/generic-rk3568_defconfig
> @@ -22,7 +22,6 @@ CONFIG_SPL_LOAD_FIT=y
> CONFIG_LEGACY_IMAGE_FORMAT=y
> CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-generic.dtb"
> # CONFIG_DISPLAY_CPUINFO is not set
> -CONFIG_DISPLAY_BOARDINFO_LATE=y
> CONFIG_SPL_MAX_SIZE=0x40000
> CONFIG_SPL_PAD_TO=0x7f8000
> # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
> @@ -31,6 +30,7 @@ CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000
> CONFIG_SPL_ATF=y
> CONFIG_CMD_GPIO=y
> CONFIG_CMD_GPT=y
> +CONFIG_CMD_MISC=y
> CONFIG_CMD_MMC=y
> CONFIG_CMD_ROCKUSB=y
> CONFIG_CMD_USB_MASS_STORAGE=y
> --
> 2.46.2
>
Regards,
Simon
