From: Thomas Herzmann <thomas.herzm...@keymile.com>
The initial_boot_bank can be set when more than one application is
used in a bootpackage. But a value n <> 0 never led to booting from
bank n. Instead, bank 0 was booted. This patch fixes this.
Signed-off-by: Thomas Herzmann <thomas.herzm...@keymile.com>
Signed-off-by: Holger Brunck <holger.bru...@keymile.com>
Signed-off-by: Valentin Longchamp <valentin.longch...@keymile.com>
Acked-by: Heiko Schocher <h...@denx.de>
cc: Wolfgang Denk <w...@denx.de>
cc: Detlev Zundel <d...@denx.de>
---
Changes for v2:
- split up first large patch serie to three independent smaller
patch series
- no change in the content of this patch
include/configs/keymile-common.h | 15 ++++++++-------
1 files changed, 8 insertions(+), 7 deletions(-)
diff --git a/include/configs/keymile-common.h b/include/configs/keymile-common.h
index cb6d0fb..bc8a896 100644
--- a/include/configs/keymile-common.h
+++ b/include/configs/keymile-common.h
@@ -247,10 +247,10 @@
"printbootargs boot " \
"\" && " \
"setenv bootcmd \'" \
- "run bootrunner; reset" \
+ "run actual bootrunner; reset" \
"\' && " \
"setenv altbootcmd \'" \
- "run actual0 bootcmd; reset" \
+ "run backup bootrunner; reset" \
"\' && " \
"saveenv && " \
"reset\0" \
@@ -288,7 +288,7 @@
"addramfs=" \
"setenv bootargs \"" \
"${bootargs} phram.phram=" \
- "rootfs${actual_bank},${rootfsaddr},${rootfssize}\"\0" \
+ "rootfs${boot_bank},${rootfsaddr},${rootfssize}\"\0" \
"addtty=" \
"setenv bootargs ${bootargs}" \
" console=" CONFIG_KM_CONSOLE_TTY ",${baudrate}\0" \
@@ -303,7 +303,7 @@
"flashargs=" \
"setenv bootargs " \
"ubi.mtd=" CONFIG_KM_UBI_LINUX_MTD_NAME " " \
- "root=mtdblock:rootfs${actual_bank} " \
+ "root=mtdblock:rootfs${boot_bank} " \
"rootfstype=squashfs ro\0" \
""
@@ -352,7 +352,7 @@
"cramfsload ${kernel_addr_r} uImage && " \
"setenv actual_kernel_addr ${kernel_addr_r}\0" \
"ubiattach=ubi part ${ubipartition}\0" \
- "ubicopy=ubi read ${cramfsaddr} bootfs${actual_bank}\0" \
+ "ubicopy=ubi read ${cramfsaddr} bootfs${boot_bank}\0" \
"ubipartition=" CONFIG_KM_UBI_PARTITION_NAME "\0" \
""
@@ -382,9 +382,10 @@
* - 'default': setup default environment
*/
#define CONFIG_KM_DEF_ENV_CONSTANTS \
- "actual=setenv actual_bank ${initial_boot_bank}\0" \
- "actual0=setenv actual_bank 0\0" \
+ "actual=setenv boot_bank ${actual_bank}\0" \
+ "backup=setenv boot_bank ${backup_bank}\0" \
"actual_bank=${initial_boot_bank}\0" \
+ "backup_bank=0\0" \
"default=" \
"setenv default 'run newenv; reset' && " \
"run release && saveenv; reset\0" \
--
1.7.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
