Hi,
On 10/10/2024 09:31, Marek Behún wrote:
Hi all,
I am searching for HW that supports both USB host & USB device/gadget
mode, on the same USB port, capable of switching between these modes
at runtime.
Preferably supported in upstream kernel.
The following commercial dev boards support dual and runtime switch on mainline
U-Boot and Mainline Linux:
- Khadas VIM3/L (with external supply)
- Odroid-N2(+) https://www.hardkernel.com/shop/odroid-n2-with-4gbyte-ram-2/
- Odroid-N2L https://www.hardkernel.com/shop/odroid-n2l-with-2gbyte-ram/
- Odroid-HC4 https://www.hardkernel.com/shop/odroid-hc4/
- Libre Computer AML-A311D-CC https://libre.computer/products/aml-a311d-cc/
(with external supply)
- Libre Computer AML-S905D3-CC https://libre.computer/products/aml-s905d3-cc/
(with external supply)
- BananaPi M5 https://wiki.banana-pi.org/Banana_Pi_BPI-M5 (with external supply)
- BananaPi M2S hhttps://wiki.banana-pi.org/Banana_Pi_BPI-M2S (with external
supply)
Neil
Has anyone done this for example with Raspberry Pi?
Thanks.
Marek
