Hello, Valentin Longchamp wrote: > This series is the second effort of merging the Keymile boards support > back into mainline. > > Most of the patches are only keymile relevant and should only affect our > boards. > > There are also patches for the i2c deblocking support and cramfs for ARM.
We have split the whole series so that it gets easier to apply through the various trees: 1) the i2c patches were sent by Heiko and already applied 2) lib, vsprintf: introduce strict_strtoul and cramfs: make cramfs usable without a NOR flash are (or already have been) resent as standalone patches 3) Holger is going to send a series for km82xx changes 4) Holger is going to send a series with the keymile changes 5) I will send a series with the ARM/marvell changes I hope this will simplify the review and merging of these patches into mainline. Best Regards Valentin > > The whole series is based on current denx-master with the our first patch > series posted by Heiko that was reviewed previous weeks and should still > be merged during the current merge window: > > http://lists.denx.de/pipermail/u-boot/2011-April/089530.html > > Heiko Schocher (5): > lib, vsprintf: introduce strict_strtoul > arm/km: add CRAMFS support for keymile boards > cramfs: make cramfs usable without a NOR flash > i2c, soft_i2c: deblock bus if switching to another i2c bus > arm, powerpc, keymile boards: move keymile specific header in subdir > > Holger Brunck (18): > km/common: remove hdlc_enet implementation > powerpc/km82xx: cleanup coding style for mgcoge.c > powerpc/km82xx: rename mgcoge files to km82xx > powerpc/km82xx: move SDRAM config to board config > powerpc/km82xx: adapt CONFIG_SYSSYPCR to manual > powerpc/km82xx: rename mgcoge2ne to mgcoge3ne board support > poweprc/km82xx: add board specific environment variable > arm/km: add addbootcount environment variable > arm/km: remove last_stage_init and unneeded printouts > arm/km: add second serial interface for kirkwood > common/hush: make get_local_var visible for other users > km/common: implement setboardid as a command > km/common: add pnvramsize to default environment > km/common: fix coding style issues in generic header > km/common: simplify default environment > arm/km: rename mgcoge2un to mgcoge3un > arm/km: change default settings for egiga on mgcoge3un > arm/km: update mgcoge3un board support > > Huber, Andreas (1): > powerpc/km82xx: add DIP switch detection > > Stefan Bigler (1): > i2c: add i2c deblock sequence before and after every mux config > > Thomas Herzmann (2): > km/common: fix initial_boot_bank for bootpackages > km/common: replace env var checkboardidlist by function > > Valentin Longchamp (3): > arm/km: add mkimage config file for uart download > arm/km: add BootROM config files for memphis SDRAM > arm/km: disable ls (through jffs2 support) > > MAINTAINERS | 4 +- > board/keymile/common/common.c | 156 ++++++- > board/keymile/common/common.h | 84 +++- > board/keymile/common/keymile_hdlc_enet.c | 620 > ------------------------ > board/keymile/{mgcoge => km82xx}/Makefile | 3 +- > board/keymile/km82xx/km82xx.c | 373 ++++++++++++++ > board/keymile/km_arm/km_arm.c | 93 +++- > board/keymile/km_arm/kwbimage-memphis-uart.cfg | 197 ++++++++ > board/keymile/km_arm/kwbimage-memphis.cfg | 197 ++++++++ > board/keymile/km_arm/kwbimage-uart.cfg | 179 +++++++ > board/keymile/mgcoge/mgcoge.c | 333 ------------- > board/keymile/mgcoge/mgcoge_hdlc_enet.c | 276 ----------- > board/keymile/scripts/README | 25 + > board/keymile/scripts/debug-arm-env.txt | 2 + > board/keymile/scripts/debug-common-env.txt | 9 + > board/keymile/scripts/debug-ppc-env.txt | 2 + > boards.cfg | 6 +- > common/cmd_cramfs.c | 12 +- > common/cmd_i2c.c | 12 + > common/hush.c | 3 +- > drivers/i2c/soft_i2c.c | 1 + > drivers/net/mvgbe.h | 2 + > fs/cramfs/cramfs.c | 4 + > include/_exports.h | 1 + > include/common.h | 1 + > include/configs/{ => km}/keymile-common.h | 175 +------ > include/configs/{ => km}/km-powerpc.h | 12 +- > include/configs/{ => km}/km82xx-common.h | 29 +- > include/configs/{ => km}/km8321-common.h | 0 > include/configs/{ => km}/km83xx-common.h | 0 > include/configs/{ => km}/km_arm.h | 25 +- > include/configs/kmeter1.h | 2 +- > include/configs/kmsupx5.h | 2 +- > include/configs/mgcoge.h | 35 ++- > include/configs/{mgcoge2ne.h => mgcoge3ne.h} | 57 ++- > include/configs/{mgcoge2un.h => mgcoge3un.h} | 37 ++- > include/configs/suen3.h | 2 +- > include/configs/suen8.h | 2 +- > include/configs/suvd3.h | 2 +- > include/configs/tuda1.h | 2 +- > include/configs/tuxa1.h | 2 +- > include/exports.h | 1 + > include/hush.h | 1 + > include/i2c.h | 2 - > lib/vsprintf.c | 47 ++ > 45 files changed, 1531 insertions(+), 1499 deletions(-) > delete mode 100644 board/keymile/common/keymile_hdlc_enet.c > rename board/keymile/{mgcoge => km82xx}/Makefile (94%) > create mode 100644 board/keymile/km82xx/km82xx.c > create mode 100644 board/keymile/km_arm/kwbimage-memphis-uart.cfg > create mode 100644 board/keymile/km_arm/kwbimage-memphis.cfg > create mode 100644 board/keymile/km_arm/kwbimage-uart.cfg > delete mode 100644 board/keymile/mgcoge/mgcoge.c > delete mode 100644 board/keymile/mgcoge/mgcoge_hdlc_enet.c > create mode 100644 board/keymile/scripts/README > create mode 100644 board/keymile/scripts/debug-arm-env.txt > create mode 100644 board/keymile/scripts/debug-common-env.txt > create mode 100644 board/keymile/scripts/debug-ppc-env.txt > rename include/configs/{ => km}/keymile-common.h (63%) > rename include/configs/{ => km}/km-powerpc.h (91%) > rename include/configs/{ => km}/km82xx-common.h (93%) > rename include/configs/{ => km}/km8321-common.h (100%) > rename include/configs/{ => km}/km83xx-common.h (100%) > rename include/configs/{ => km}/km_arm.h (93%) > rename include/configs/{mgcoge2ne.h => mgcoge3ne.h} (57%) > rename include/configs/{mgcoge2un.h => mgcoge3un.h} (65%) > -- Valentin Longchamp Embedded Software Engineer Hardware and Chip Integration ______________________________________ KEYMILE AG Schwarzenburgstr. 73 CH-3097 Liebefeld Phone +41 31 377 1318 Fax +41 31 377 1212 valentin.longch...@keymile.com www.keymile.com ______________________________________ KEYMILE: A Specialist as a Partner _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
