The cpu0-opp-table {} node does not exist in upstream Linux stm32mp151.dtsi
file, in order to enable conversion to OF_UPSTREAM, duplicate the node from
current U-Boot stm32mp151.dtsi into stm32mp15-u-boot.dtsi. This makes STM32
DTs buildable even with OF_UPSTREAM enabled. No functional change, since the
current U-Boot stm32mp151.dtsi already contains the cpu0-opp-table {} node,
stm32mp15-u-boot.dtsi is applied at the end, and does not bring in any new
content.
Signed-off-by: Marek Vasut <ma...@denx.de>
---
Cc: Patrice Chotard <patrice.chot...@foss.st.com>
Cc: Patrick Delaunay <patrick.delau...@foss.st.com>
Cc: Sean Anderson <sean...@gmail.com>
Cc: Simon Glass <s...@chromium.org>
Cc: Tom Rini <tr...@konsulko.com>
Cc: u-b...@dh-electronics.com
Cc: u-boot@lists.denx.de
Cc: uboot-st...@st-md-mailman.stormreply.com
---
V2: No change
---
arch/arm/dts/stm32mp15-u-boot.dtsi | 30 ++++++++++++++++++++++--------
1 file changed, 22 insertions(+), 8 deletions(-)
diff --git a/arch/arm/dts/stm32mp15-u-boot.dtsi
b/arch/arm/dts/stm32mp15-u-boot.dtsi
index fe56f05616a..66d4c40c6a8 100644
--- a/arch/arm/dts/stm32mp15-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp15-u-boot.dtsi
@@ -56,6 +56,24 @@
status = "okay";
};
};
+
+ cpu0_opp_table: cpu0-opp-table {
+ compatible = "operating-points-v2";
+ opp-shared;
+ bootph-pre-ram;
+ opp-650000000 {
+ bootph-pre-ram;
+ opp-hz = /bits/ 64 <650000000>;
+ opp-microvolt = <1200000>;
+ opp-supported-hw = <0x1>;
+ };
+ opp-800000000 {
+ bootph-pre-ram;
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <1350000>;
+ opp-supported-hw = <0x2>;
+ };
+ };
};
&bsec {
@@ -82,14 +100,10 @@
bootph-all;
};
-&cpu0_opp_table {
- bootph-pre-ram;
- opp-650000000 {
- bootph-pre-ram;
- };
- opp-800000000 {
- bootph-pre-ram;
- };
+&cpu0 {
+ nvmem-cells = <&part_number_otp>;
+ nvmem-cell-names = "part_number";
+ operating-points-v2 = <&cpu0_opp_table>;
};
&gpioa {
--
2.45.2
