From: Joy Zou <joy....@nxp.com>
Add regulator support for NXP pmic pf5300.
Signed-off-by: Joy Zou <joy....@nxp.com>
Reviewed-by: Ye Li <ye...@nxp.com>
Signed-off-by: Peng Fan <peng....@nxp.com>
---
drivers/power/regulator/Kconfig | 15 ++
drivers/power/regulator/Makefile | 1 +
drivers/power/regulator/pf5300.c | 247 +++++++++++++++++++++++++++++++
3 files changed, 263 insertions(+)
create mode 100644 drivers/power/regulator/pf5300.c
diff --git a/drivers/power/regulator/Kconfig b/drivers/power/regulator/Kconfig
index b2f487b050b..69dfb07df50 100644
--- a/drivers/power/regulator/Kconfig
+++ b/drivers/power/regulator/Kconfig
@@ -111,6 +111,21 @@ config SPL_DM_REGULATOR_PF0900
This config enables implementation of driver-model regulator uclass
features for regulators on ROHM PF0900 in SPL.
+config DM_REGULATOR_PF5300
+ bool "Enable Driver Model for NXP PF5300 regulators"
+ depends on DM_REGULATOR && DM_PMIC_PF5300
+ help
+ This config enables implementation of driver-model regulator uclass
+ features for regulators on NXP PF5300 PMICs. PF5300 contains 1 sw.
+ The driver implements get/set api for value and enable.
+
+config SPL_DM_REGULATOR_PF5300
+ bool "Enable Driver Model for NXP PF5300 regulators in SPL"
+ depends on DM_REGULATOR_PF0900 && SPL
+ help
+ This config enables implementation of driver-model regulator uclass
+ features for regulators on ROHM PF5300 in SPL.
+
config DM_REGULATOR_DA9063
bool "Enable Driver Model for REGULATOR DA9063"
depends on DM_REGULATOR && DM_PMIC_DA9063
diff --git a/drivers/power/regulator/Makefile b/drivers/power/regulator/Makefile
index a49700dfd25..7a580d45b72 100644
--- a/drivers/power/regulator/Makefile
+++ b/drivers/power/regulator/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_$(SPL_)DM_PMIC_PFUZE100) += pfuze100.o
obj-$(CONFIG_$(SPL_)DM_REGULATOR_BD71837) += bd71837.o
obj-$(CONFIG_$(SPL_)DM_REGULATOR_PCA9450) += pca9450.o
obj-$(CONFIG_$(SPL_)DM_REGULATOR_PF0900) += pf0900.o
+obj-$(CONFIG_$(SPL_)DM_REGULATOR_PF5300) += pf5300.o
obj-$(CONFIG_$(SPL_)REGULATOR_PWM) += pwm_regulator.o
obj-$(CONFIG_$(SPL_)DM_REGULATOR_FAN53555) += fan53555.o
obj-$(CONFIG_$(SPL_)DM_REGULATOR_COMMON) += regulator_common.o
diff --git a/drivers/power/regulator/pf5300.c b/drivers/power/regulator/pf5300.c
new file mode 100644
index 00000000000..6df24934e09
--- /dev/null
+++ b/drivers/power/regulator/pf5300.c
@@ -0,0 +1,247 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * NXP PF5300 regulator driver
+ * Copyright 2023 NXP
+ */
+
+#include <dm.h>
+#include <errno.h>
+#include <log.h>
+#include <linux/bitops.h>
+#include <power/pf5300.h>
+#include <power/pmic.h>
+#include <power/regulator.h>
+
+/**
+ * struct pf5300_vrange - describe linear range of voltages
+ *
+ * @min_volt: smallest voltage in range
+ * @step: how much voltage changes at each selector step
+ * @min_sel: smallest selector in the range
+ * @max_sel: maximum selector in the range
+ */
+struct pf5300_vrange {
+ unsigned int min_volt;
+ u8 min_sel;
+ u8 max_sel;
+ unsigned int step;
+};
+
+/**
+ * struct pf5300_plat - describe regulator control registers
+ *
+ * @name: name of the regulator. Used for matching the dt-entry
+ * @enable_reg: register address used to enable/disable regulator
+ * @enablemask: register mask used to enable/disable regulator
+ * @volt_reg: register address used to configure regulator voltage
+ * @volt_mask: register mask used to configure regulator voltage
+ * @ranges: pointer to ranges of regulator voltages and matching register
+ * values
+ * @numranges: number of voltage ranges pointed by ranges
+ */
+struct pf5300_plat {
+ const char *name;
+ u8 enable_reg;
+ u8 enablemask;
+ u8 volt_reg;
+ u8 volt_mask;
+ struct pf5300_vrange *ranges;
+ unsigned int numranges;
+};
+
+#define PCA_RANGE(_min, _sel_low, _sel_hi, _vstep) \
+{ \
+ .min_volt = (_min), .min_sel = (_sel_low), \
+ .max_sel = (_sel_hi), .step = (_vstep),\
+}
+
+#define PCA_DATA(_name, enreg, enmask, vreg, vmask, _range) \
+{ \
+ .name = (_name), .enable_reg = (enreg), .enablemask = (enmask), \
+ .volt_reg = (vreg), .volt_mask = (vmask), .ranges = (_range), \
+ .numranges = ARRAY_SIZE(_range) \
+}
+
+static struct pf5300_vrange pf5300_sw1_vranges[] = {
+ PCA_RANGE(500000, 0x00, 0x8C, 5000),
+ PCA_RANGE(0, 0x8D, 0xFF, 0),
+};
+
+static struct pf5300_plat pf5301_reg_data[] = {
+ PCA_DATA("SW1_2a", PF5300_REG_SW1_CTRL1, SW_MODE_PWM,
+ PF5300_REG_SW1_VOLT, SW1_VOLT_MASK,
+ pf5300_sw1_vranges),
+};
+
+static struct pf5300_plat pf5302_reg_data[] = {
+ PCA_DATA("SW1_29", PF5300_REG_SW1_CTRL1, SW_MODE_PWM,
+ PF5300_REG_SW1_VOLT, SW1_VOLT_MASK,
+ pf5300_sw1_vranges),
+};
+
+static int vrange_find_value(struct pf5300_vrange *r, unsigned int sel,
+ unsigned int *val)
+{
+ if (!val || sel < r->min_sel || sel > r->max_sel)
+ return -EINVAL;
+
+ *val = r->min_volt + r->step * (sel - r->min_sel);
+ return 0;
+}
+
+static int vrange_find_selector(struct pf5300_vrange *r, int val,
+ unsigned int *sel)
+{
+ int ret = -EINVAL;
+ int num_vals = r->max_sel - r->min_sel + 1;
+
+ if (val >= r->min_volt &&
+ val <= r->min_volt + r->step * (num_vals - 1)) {
+ if (r->step) {
+ *sel = r->min_sel + ((val - r->min_volt) / r->step);
+ ret = 0;
+ } else {
+ *sel = r->min_sel;
+ ret = 0;
+ }
+ }
+ return ret;
+}
+
+static int pf5300_get_enable(struct udevice *dev)
+{
+ struct pf5300_plat *plat = dev_get_plat(dev);
+ int val;
+
+ val = pmic_reg_read(dev->parent, plat->enable_reg);
+ if (val < 0)
+ return val;
+
+ return (val & plat->enablemask);
+}
+
+static int pf5300_set_enable(struct udevice *dev, bool enable)
+{
+ int val = 0;
+ int tmp = 0;
+ struct pf5300_plat *plat = dev_get_plat(dev);
+
+ if (enable)
+ tmp = plat->enablemask;
+ val = pmic_reg_read(dev->parent, plat->enable_reg);
+ if (tmp < 0)
+ return tmp;
+ val = (tmp & plat->enablemask) | (val & (~plat->enablemask));
+
+ return pmic_reg_write(dev->parent, plat->enable_reg, val);
+}
+
+static int pf5300_get_value(struct udevice *dev)
+{
+ struct pf5300_plat *plat = dev_get_plat(dev);
+ unsigned int reg, tmp;
+ int i, ret;
+
+ ret = pmic_reg_read(dev->parent, plat->volt_reg);
+ if (ret < 0)
+ return ret;
+
+ reg = ret;
+ reg &= plat->volt_mask;
+
+ for (i = 0; i < plat->numranges; i++) {
+ struct pf5300_vrange *r = &plat->ranges[i];
+
+ if (!vrange_find_value(r, reg, &tmp))
+ return tmp;
+ }
+
+ pr_err("Unknown voltage value read from pmic\n");
+
+ return -EINVAL;
+}
+
+static int pf5300_set_value(struct udevice *dev, int uvolt)
+{
+ struct pf5300_plat *plat = dev_get_plat(dev);
+ unsigned int sel;
+ int i, val, found = 0;
+
+ for (i = 0; i < plat->numranges; i++) {
+ struct pf5300_vrange *r = &plat->ranges[i];
+
+ found = !vrange_find_selector(r, uvolt, &sel);
+ if (found) {
+ unsigned int tmp;
+
+ /*
+ * We require exactly the requested value to be
+ * supported - this can be changed later if needed
+ */
+ found = !vrange_find_value(r, sel, &tmp);
+ if (found && tmp == uvolt)
+ break;
+ found = 0;
+ }
+ }
+
+ if (!found)
+ return -EINVAL;
+
+ val = pmic_reg_read(dev->parent, plat->volt_reg);
+ if (val < 0)
+ return val;
+ val = (sel & plat->volt_mask) | (val & (~plat->volt_mask));
+ return pmic_reg_write(dev->parent, plat->volt_reg, val);
+}
+
+static int pf5300_regulator_probe(struct udevice *dev)
+{
+ struct pf5300_plat *plat = dev_get_plat(dev);
+ int i, type;
+
+ type = dev_get_driver_data(dev_get_parent(dev));
+
+ if (type != PF5300_TYPE_PF5300 && type != PF5300_TYPE_PF5301 &&
+ type != PF5300_TYPE_PF5302) {
+ debug("Unknown PMIC type\n");
+ return -EINVAL;
+ }
+
+ if (type == PF5300_TYPE_PF5301) {
+ for (i = 0; i < ARRAY_SIZE(pf5301_reg_data); i++) {
+ if (strcmp(dev->name, pf5301_reg_data[i].name))
+ continue;
+ *plat = pf5301_reg_data[i];
+
+ return 0;
+ }
+ } else if (type == PF5300_TYPE_PF5302) {
+ for (i = 0; i < ARRAY_SIZE(pf5302_reg_data); i++) {
+ if (strcmp(dev->name, pf5302_reg_data[i].name))
+ continue;
+ *plat = pf5301_reg_data[i];
+
+ return 0;
+ }
+ }
+
+ pr_err("Unknown regulator '%s'\n", dev->name);
+
+ return -ENOENT;
+}
+
+static const struct dm_regulator_ops pf5300_regulator_ops = {
+ .get_value = pf5300_get_value,
+ .set_value = pf5300_set_value,
+ .get_enable = pf5300_get_enable,
+ .set_enable = pf5300_set_enable,
+};
+
+U_BOOT_DRIVER(pf5300_regulator) = {
+ .name = PF5300_REGULATOR_DRIVER,
+ .id = UCLASS_REGULATOR,
+ .ops = &pf5300_regulator_ops,
+ .probe = pf5300_regulator_probe,
+ .plat_auto = sizeof(struct pf5300_plat),
+};
--
2.35.3
