On Wed, 18 Sept 2024 at 17:22, Patrick Rudolph <patrick.rudo...@9elements.com> wrote: > > Fill the MADT table in the GICV3 driver and armv8 CPU driver to > drop SoC specific code. While the GIC only needs devicetree > data, the CPU driver needs additional information stored in > the cpu_plat struct. > > While on it update the only board making use of the existing > drivers and writing ACPI MADT in mainboard code. > > TEST: Booted on QEMU sbsa-ref using GICV3 driver model generated MADT. > Booted on QEMU raspb4 using GICV2 driver model generated MADT. > > Signed-off-by: Patrick Rudolph <patrick.rudo...@9elements.com> > Cc: Simon Glass <s...@chromium.org> > --- > Changelog v4: > - Read everything from the DT > - Export armv8_cpu_fill_madt() to use it in other CPU drivers > - Depend on IRQ > > --- > arch/arm/lib/gic-v3-its.c | 89 ++++++++++++++++++++++++++++++++++++++- > drivers/cpu/Kconfig | 1 + > drivers/cpu/armv8_cpu.c | 80 ++++++++++++++++++++++++++++++++++- > drivers/cpu/armv8_cpu.h | 10 +++++ > 4 files changed, 178 insertions(+), 2 deletions(-) >
Reviewed-by: Simon Glass <s...@chromium.org> I'm still not sure why you are using u64 instead of ulong?
