Hi Peng, On Wed, Sep 18, 2024 at 11:38 PM Peng Fan <peng....@nxp.com> wrote:
> Based on Tom's next branch, right? Correct. This is the error I get: git am -3 ~/Downloads/imx9-various-update.patch Applying: imx9: soc: wait ssar when power on power domain Applying: imx9: soc: Configure TRDC for M33 TCM access Applying: imx9: soc: imx9: soc: Align UID endianness with ROM Applying: imx9: soc: Print UID in big endian format for EL2GO Applying: imx9: soc: Change FSB directly access to fuse API Applying: imx9: soc: Change second Ethernet MAC fuse layout Applying: imx9: soc: Print ELE information Applying: imx9: soc: Add function to get target voltage mode Applying: imx9: clock: Update clock init function and sequence Applying: imx9: soc: Mask the wdog reset in src by default on i.mx9 Applying: imx9: Add 233Mhz DDR PLL frequency Applying: imx8m: soc: Drop disable_pmu_cpu_nodes Applying: imx: Generalize disable_cpu_nodes error: sha1 information is lacking or useless (arch/arm/mach-imx/imx8m/soc.c). error: could not build fake ancestor Patch failed at 0013 imx: Generalize disable_cpu_nodes hint: Use 'git am --show-current-patch=diff' to see the failed patch When you have resolved this problem, run "git am --continue". If you prefer to skip this patch, run "git am --skip" instead. To restore the original branch and stop patching, run "git am --abort".