On Wed, 21 Aug 2024 at 07:43, Caleb Connolly <caleb.conno...@linaro.org> wrote: > > Introduce a defconfig for the RB3 Gen 2 and other QCM6490 boards with a > dedicated uefi partition. These can replace EDK2 entirely with U-Boot. > > Signed-off-by: Caleb Connolly <caleb.conno...@linaro.org> > --- > MAINTAINERS | 1 + > configs/qcm6490_defconfig | 18 ++++++++++++++++++ > 2 files changed, 19 insertions(+)
Reviewed-by: Simon Glass <s...@chromium.org> > > diff --git a/MAINTAINERS b/MAINTAINERS > index daaf0345d0e8..7ab39d91a553 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -616,8 +616,9 @@ M: Neil Armstrong <neil.armstr...@linaro.org> > R: Sumit Garg <sumit.g...@linaro.org> > L: u-boot-q...@groups.io > S: Maintained > T: git https://source.denx.de/u-boot/custodians/u-boot-snapdragon.git > +F: configs/qcm6490_defconfig > F: drivers/*/*/pm8???-* > F: drivers/gpio/msm_gpio.c > F: drivers/mmc/msm_sdhci.c > F: drivers/phy/msm8916-usbh-phy.c > diff --git a/configs/qcm6490_defconfig b/configs/qcm6490_defconfig > new file mode 100644 > index 000000000000..25413ac9ed5a > --- /dev/null > +++ b/configs/qcm6490_defconfig > @@ -0,0 +1,18 @@ > +# Configuration for building U-Boot to be flashed > +# to the uefi partition of QCM6490 dev boards with > +# the "Linux Embedded" partition layout (which have > +# a dedicated "uefi" partition for edk2/U-Boot) > + > +#include "qcom_defconfig" > + > +CONFIG_DEBUG_UART=y > +CONFIG_DEBUG_UART_ANNOUNCE=y > +CONFIG_DEBUG_UART_BASE=0x994000 > +CONFIG_DEBUG_UART_MSM_GENI=y > +CONFIG_DEBUG_UART_CLOCK=14745600 > + > +# Address where U-Boot will be loaded > +CONFIG_TEXT_BASE=0x9fc00000 > +CONFIG_REMAKE_ELF=y > + > +CONFIG_DEFAULT_DEVICE_TREE="qcom/qcs6490-rb3gen2" > > -- > 2.46.0 >
