From: Fabio Estevam <feste...@denx.de>
Currently, the bmode command only supports booting from ecspi1.
Expand it to also support booting from ecspi3.
Signed-off-by: Fabio Estevam <feste...@denx.de>
---
arch/arm/mach-imx/mx6/soc.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/mach-imx/mx6/soc.c b/arch/arm/mach-imx/mx6/soc.c
index 3a3e01f3d0a..2c0c77e1a56 100644
--- a/arch/arm/mach-imx/mx6/soc.c
+++ b/arch/arm/mach-imx/mx6/soc.c
@@ -585,6 +585,10 @@ const struct boot_mode soc_boot_modes[] = {
{"ecspi1:1", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x18)},
{"ecspi1:2", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x28)},
{"ecspi1:3", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x38)},
+ {"ecspi3:0", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x0a)},
+ {"ecspi3:1", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x1a)},
+ {"ecspi3:2", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x2a)},
+ {"ecspi3:3", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x3a)},
/* 4 bit bus width */
{"esdhc1", MAKE_CFGVAL(0x40, 0x20, 0x00, 0x00)},
{"esdhc2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
--
2.34.1
