Hi guys, I use u-boot to boot omap3530 Board. Angstrom is the operating flavour i use.
I got the following kernel messages while booting and, hence the devices associate with those boot arguments, does not function. Please show me a solution. Below is the log : U-Boot 2009.11 (Feb 18 2011 - 12:08:32) OMAP3530-GP ES3.1, CPU-OPP2 L3-165MHz OMAP3 SBC3530 + LPDDR/ NAND I2C: ready DRAM: 128 MB NAND: 256 MiB In: serial Out: serial Err: serial Ethernet MAC address: 02:c0:05:01:b0:05 Die ID #170000040000000004036ac00501b005 Net: smc911x-0 Hit any key to stop autoboot: 0 OMAP3 Stalker # setenv bootargs console=tty0 OMAP3 Stalker # saveenv Saving Environment to NAND... Erasing Nand... Erasing at 0x260000 -- 100% complete. Writing to Nand... done OMAP3 Stalker # boot mmc1 is available reading boot.scr ** Unable to read "boot.scr" from mmc 0:1 ** reading uImage 2897392 bytes read Booting from mmc ... ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux-2.6.32- rc5 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2897328 Bytes = 2.8 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux............................................................. Linux version 2.6.32-rc5 (yashie@dabba) (gcc version 4.3.3 (Sourcery G+ + Lite 21 CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c53c7f CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache Machine: OMAP3 STALKER Memory policy: ECC disabled, Data cache writeback OMAP3430/3530 ES3.1 - l2cache : Y - iva : Y - sgx : Y - neon : Y - isp : Y - 720m : N SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000 Reserving 12582912 bytes SDRAM for VRAM Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 Kernel command line: console=ttyS0,115200n8 vram=12M omapfb.mode=dvi: 1024x768MRt Unknown boot option `omapfb.video_mode=dvi:1024x768MR-16@60': ignoring Unknown boot option `omapfb.debug=y': ignoring Unknown boot option `omap-dss.def_disp=dvi': ignoring What could be the underlying problem ? Thanks and regards.
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
