For running U-Boot as primary bootloader we must define the memory
layout statically.
Signed-off-by: Caleb Connolly <caleb.conno...@linaro.org>
---
arch/arm/dts/qcs6490-rb3gen2-u-boot.dtsi | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/arch/arm/dts/qcs6490-rb3gen2-u-boot.dtsi
b/arch/arm/dts/qcs6490-rb3gen2-u-boot.dtsi
new file mode 100644
index 000000000000..c3ec4a317f7c
--- /dev/null
+++ b/arch/arm/dts/qcs6490-rb3gen2-u-boot.dtsi
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Linaro Ltd.
+ */
+/ {
+ /* When running as the primary bootloader there is no prior
+ * stage to populate the memory layout for us. We *should*
+ * have two nodes here, but ABL does NOT like that.
+ * sooo we're stuck with this.
+ */
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0 0x80000000 0 0x3A800000>,
+ <0 0xC0000000 0 0x01800000>,
+ <0 0xC3400000 0 0x3CC00000>,
+ <1 0x00000000 1 0x00000000>;
+ };
+};
+
+// RAM Entry 0 : Base 0x0080000000 Size 0x003A800000
+// RAM Entry 1 : Base 0x00C0000000 Size 0x0001800000
+// RAM Entry 2 : Base 0x00C3400000 Size 0x003CC00000
+// RAM Entry 3 : Base 0x0100000000 Size 0x0100000000
--
2.46.0
