From: Jan Kiszka <jan.kis...@siemens.com>
When DM_REGULATOR is disabled, all calls will return -ENOSYS. Account
for that so that targets like the IOT2050 will work again.
Fixes: de451d5d5b6f ("usb: dwc3-generic: support external vbus regulator")
Signed-off-by: Jan Kiszka <jan.kis...@siemens.com>
---
drivers/usb/dwc3/dwc3-generic.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/dwc3/dwc3-generic.c b/drivers/usb/dwc3/dwc3-generic.c
index a9ba315463c..2ab41cbae45 100644
--- a/drivers/usb/dwc3/dwc3-generic.c
+++ b/drivers/usb/dwc3/dwc3-generic.c
@@ -246,12 +246,12 @@ static int dwc3_generic_host_probe(struct udevice *dev)
return rc;
rc = device_get_supply_regulator(dev, "vbus-supply",
&priv->vbus_supply);
- if (rc)
+ if (rc && rc != -ENOSYS)
debug("%s: No vbus regulator found: %d\n", dev->name, rc);
- /* Only returns an error if regulator is valid and failed to enable due
to a driver issue */
+ /* Does not return an error if regulator is invalid - but does so when
DM_REGULATOR is disabled */
rc = regulator_set_enable_if_allowed(priv->vbus_supply, true);
- if (rc)
+ if (rc && rc != -ENOSYS)
return rc;
hccr = (struct xhci_hccr *)priv->gen_priv.base;
--
2.43.0
