Hi Benjamin,

> Hi Lukasz,
> 
> On 06.08.24 10:11, Lukasz Majewski wrote:
> > This command allows easy update on SD card or eMMC of the flash.bin
> > generated (with binman) during u-boot build.
> >
> > Signed-off-by: Lukasz Majewski <lu...@denx.de>
> > ---
> > Changes for v2:
> > - Remove 'update_mmc_part' variable
> > - Change path for hostname
> > - Use full version of dhcp command (${loadaddr} added)
> >
> > Changes for v3:
> > - Remove +1 when calculating the size of binary to be written
> > ---
> >   include/configs/phycore_imx8mm.h | 10 ++++++++++
> >   1 file changed, 10 insertions(+)
> >
> > diff --git a/include/configs/phycore_imx8mm.h
> > b/include/configs/phycore_imx8mm.h index ce6dc87c69..361e665676
> > 100644 --- a/include/configs/phycore_imx8mm.h
> > +++ b/include/configs/phycore_imx8mm.h
> > @@ -29,6 +29,16 @@
> >     "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
> >     "mmcpart=1\0" \
> >     "mmcroot=2\0" \
> > +   "update_offset=0x42\0" \
> > +   "update_filename=flash.bin\0" \
> > +   "hostname=/srv/tftp/\0" \
> > +   "update_bootimg="
> >     \
> > +           "mmc dev ${mmcdev} ; "          \
> > +           "if dhcp ${loadaddr}
> > ${hostname}/${update_filename} ; then "     \  
> 
> The dhcp and tftp command should take the filepath from the tftp 
> directory and get the tftp directory automatically not the absolute
> path. So this will try to get the file from 
> /path_to_tftp_folder/srv/tftp/flash.bin and will fail

And that is why you do have the ${hostname}/${update_filename}, so when
you have several exported directories - you can specify which one
without the need to modify the 'update_bootimg' command.

> because it
> can't find it. So you can drop the ${hostname}.

I would prefer to keep the ${hostname}/${update_filename} part.

> Also drop the initialization of ${hostname} above since it is no
> longer needed.
> 
> Should be like this:
> 
> dhcp ${loadaddr} ${update_filename}
> 

IMHO the line shall be:

dhcp ${loadaddr} ${hostname}/${update_filename}

> > +           "setexpr fw_sz ${filesize} / 0x200 ; "  /*
> > SD block size */ \
> > +           "setexpr fw_sz ${fw_sz} ; "  
> I think you can drop this line since it does not do anything.
> 

Ok.

> Benjamin
> >                             \
> > +           "mmc write ${loadaddr} ${update_offset} ${fw_sz} ;
> > "   \
> > +           "fi\0" \
> >     "mmcautodetect=yes\0" \
> >     "mmcargs=setenv bootargs console=${console} " \
> >             "root=/dev/mmcblk${mmcdev}p${mmcroot} rootwait
> > rw\0" \  
> 
> 




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lu...@denx.de

Attachment: pgpvnzEsBMQFx.pgp
Description: OpenPGP digital signature

Reply via email to