A lot of boards set FT_FSL_PCI_SETUP directly in their board code
and don't check to see if CONFIG_PCI is actually defined. This
will cause the board compilation to fail if CONFIG_PCI is not
defined. The p1022ds board is one such example.
Instead of fixing every board this patch wraps FT_FSL_PCI_SETUP
around CONFIG_PCI so we can remove CONFIG_PCI and boards will
still build properly.
cc: Kumar Gala <kumar.g...@freescale.com>
Signed-off-by: Matthew McClintock <m...@freescale.com>
---
arch/powerpc/include/asm/fsl_pci.h | 4 +++-
1 files changed, 3 insertions(+), 1 deletions(-)
diff --git a/arch/powerpc/include/asm/fsl_pci.h
b/arch/powerpc/include/asm/fsl_pci.h
index 82d75be..fc47a9f 100644
--- a/arch/powerpc/include/asm/fsl_pci.h
+++ b/arch/powerpc/include/asm/fsl_pci.h
@@ -230,7 +230,9 @@ int fsl_pcie_init_board(int busno);
#define FT_FSL_PCIE3_SETUP __FT_FSL_PCIE_SETUP(blob, FSL_PCIE_COMPAT, 3)
#define FT_FSL_PCIE4_SETUP __FT_FSL_PCIE_SETUP(blob, FSL_PCIE_COMPAT, 4)
-#if defined(CONFIG_FSL_CORENET)
+#if !defined(CONFIG_PCI)
+#define FT_FSL_PCI_SETUP
+#elif defined(CONFIG_FSL_CORENET)
#define FSL_PCIE_COMPAT "fsl,p4080-pcie"
#define FT_FSL_PCI_SETUP \
FT_FSL_PCIE1_SETUP; \
--
1.7.3.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
