* Add documentation to briefly explain the role of TIFS Stub in relevant
K3 SoC's.
* Shed light on why TIFS Stub isn't package with the DM firmware itself.
* Modify the platform docs wherever the TIFS Stub documentation applies.
* Also, refactor and add a few new labels to help split the firmware
documentation chunks. This will make it easier to include them one by
one wherever applicable
Reviewed-by: Nishanth Menon <n...@ti.com>
Signed-off-by: Dhruva Gole <d-g...@ti.com>
---
doc/board/ti/am62ax_sk.rst | 4 +++
doc/board/ti/am62px_sk.rst | 4 +++
doc/board/ti/am62x_sk.rst | 4 +++
doc/board/ti/k3.rst | 51 +++++++++++++++++++++----------
doc/board/toradex/verdin-am62.rst | 4 +++
5 files changed, 51 insertions(+), 16 deletions(-)
diff --git a/doc/board/ti/am62ax_sk.rst b/doc/board/ti/am62ax_sk.rst
index 60726b6652ce..72fa5a8d8cdd 100644
--- a/doc/board/ti/am62ax_sk.rst
+++ b/doc/board/ti/am62ax_sk.rst
@@ -60,6 +60,10 @@ Sources:
:start-after: .. k3_rst_include_start_boot_sources
:end-before: .. k3_rst_include_end_boot_sources
+.. include:: ../ti/k3.rst
+ :start-after: .. k3_rst_include_start_boot_firmwares
+ :end-before: .. k3_rst_include_end_tifsstub
+
Build procedure:
----------------
0. Setup the environment variables:
diff --git a/doc/board/ti/am62px_sk.rst b/doc/board/ti/am62px_sk.rst
index c80b50681176..bcef6653cb92 100644
--- a/doc/board/ti/am62px_sk.rst
+++ b/doc/board/ti/am62px_sk.rst
@@ -68,6 +68,10 @@ Sources:
:start-after: .. k3_rst_include_start_boot_sources
:end-before: .. k3_rst_include_end_boot_sources
+.. include:: ../ti/k3.rst
+ :start-after: .. k3_rst_include_start_boot_firmwares
+ :end-before: .. k3_rst_include_end_tifsstub
+
Build procedure:
----------------
diff --git a/doc/board/ti/am62x_sk.rst b/doc/board/ti/am62x_sk.rst
index 2a25e84f6c97..e2a848d159ff 100644
--- a/doc/board/ti/am62x_sk.rst
+++ b/doc/board/ti/am62x_sk.rst
@@ -59,6 +59,10 @@ Sources:
:start-after: .. k3_rst_include_start_boot_sources
:end-before: .. k3_rst_include_end_boot_sources
+.. include:: ../ti/k3.rst
+ :start-after: .. k3_rst_include_start_boot_firmwares
+ :end-before: .. k3_rst_include_end_tifsstub
+
Build procedure:
----------------
0. Setup the environment variables:
diff --git a/doc/board/ti/k3.rst b/doc/board/ti/k3.rst
index 67b066a07d3a..c3513f0aee20 100644
--- a/doc/board/ti/k3.rst
+++ b/doc/board/ti/k3.rst
@@ -182,25 +182,44 @@ online
.. note::
- The TI Firmware required for functionality of the system can be
- one of the following combination (see platform specific boot diagram for
- further information as to which component runs on which processor):
-
- * **TIFS** - TI Foundational Security Firmware - Consists of purely firmware
- meant to run on the security enclave.
- * **DM** - Device Management firmware also called TI System Control Interface
- server (TISCI Server) - This component purely plays the role of managing
- device resources such as power, clock, interrupts, dma etc. This firmware
- runs on a dedicated or multi-use microcontroller outside the security
- enclave.
-
- OR
-
- * **SYSFW** - System firmware - consists of both TIFS and DM both running on
- the security enclave.
+ The TI Firmwares required for functionality of the system are (see
+ platform specific boot diagram for further information as to which
+ component runs on which processor):
.. k3_rst_include_end_boot_sources
+.. k3_rst_include_start_boot_firmwares
+
+* **TIFS** - TI Foundational Security Firmware - Consists of purely firmware
+ meant to run on the security enclave.
+* **DM** - Device Management firmware also called TI System Control Interface
+ server (TISCI Server) - This component purely plays the role of managing
+ device resources such as power, clock, interrupts, dma etc. This firmware
+ runs on a dedicated or multi-use microcontroller outside the security
+ enclave.
+
+.. k3_rst_include_end_boot_firmwares
+.. k3_rst_include_start_tifsstub
+
+* **TIFS Stub** - The TIFS stub is a small piece of binary designed to help
+ restore the required security context and resume the TIFS firmware when
+ the system resumes from low-power modes such as suspend-to-RAM/Deep
+ Sleep. This stub uses the same encryption and customer key signing model
+ as TIFS and is loaded into the ATCM (Tightly Coupled Memory 'A' of the
+ DM R5) during DM startup. Due to the independent certificate signing
+ process, the stub is maintained separately from DM.
+
+.. k3_rst_include_end_tifsstub
+
+OR
+
+.. k3_rst_include_start_boot_firmwares_sysfw
+
+* **SYSFW** - System firmware - consists of both TIFS and DM both running on
+ the security enclave.
+
+.. k3_rst_include_end_boot_firmwares_sysfw
+
Build Procedure
---------------
diff --git a/doc/board/toradex/verdin-am62.rst
b/doc/board/toradex/verdin-am62.rst
index e8d902732883..93912adc896d 100644
--- a/doc/board/toradex/verdin-am62.rst
+++ b/doc/board/toradex/verdin-am62.rst
@@ -29,6 +29,10 @@ Sources:
:start-after: .. k3_rst_include_start_boot_sources
:end-before: .. k3_rst_include_end_boot_sources
+.. include:: ../ti/k3.rst
+ :start-after: .. k3_rst_include_start_boot_firmwares
+ :end-before: .. k3_rst_include_end_tifsstub
+
Build procedure:
----------------
--
2.34.1
